Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps

Small 12 and 24 V pumps

The whole category rests on two models, the twelve-volt one with fourteen watts, seven hundred litres an hour and five metres of head, and the twenty-four-volt one with twenty-six watts, eight hundred litres and seven metres. The nearly doubled draw therefore buys two metres of height but only a hundred litres an hour. Inside runs a brushless motor with nothing in it to wear, so the body can be potted solid and taken up to IP68. And a half-inch thread measures barely twenty-one millimetres across the crests, whereas the hose slides onto barbs of fourteen or sixteen.
28 products

Small 12 and 24 V pumps

The range looks varied, but in truth it is two models under many descriptions. The twelve-volt one draws fourteen watts, gives seven hundred litres an hour and pushes them to five metres, the twenty-four-volt one draws twenty-six watts, gives eight hundred litres and reaches seven metres. Both versions carry IP68 protection and a black body, and they come either with the bare DC socket or straight away with a mains adapter. On one of the twelve-volt models the description adds that it takes water and diesel, the rest reckon on water alone.

Behind a pump this small being allowed to stay permanently under water is the brushless motor. The winding sits in the stator on such a motor, nothing inside rubs or sparks, and the brush and commutator drop out, which are exactly the parts that go first in an ordinary DC motor. Because the motor needs no moving air inside it for cooling, it can be potted and sealed entirely, and that is precisely the road to IP68. Quiet running comes as a by-product, given on one model in the range as thirty-five decibels.

Choosing between twelve and twenty-four volts looks like choosing power, but you buy twenty-four volts for the height and not for the litres. Twenty-six watts against fourteen is nearly double, and yet only a hundred litres an hour more comes out of it. The head, on the other hand, rises from five metres to seven, and that is the part that makes the higher voltage worth it. The current on the stronger model is even lower, because twenty-six watts at twenty-four volts works out at about one and a tenth amps, whereas fourteen watts at twelve volts is almost one and two tenths.

The connection appears in the descriptions as three different numbers, and that is because half an inch is not the hose size. The inch figure on pipe threads names the approximate bore of the pipe the thread was designed for, not the diameter of the thread itself. A G half-inch thread therefore measures barely twenty-one millimetres across the crests, which is the figure the description rounds to twenty millimetres. The hose, by contrast, slides onto barbs of fourteen or sixteen millimetres, so measure the hose before you buy and not the thread.

The last point is about what is actually sealed, because the IP68 rating belongs to the pump and not to the adapter. The mains supply in the set is an ordinary household unit for the wall socket, and the joint at the DC plug is not built to be submerged, so both have to stay dry. The pump itself is centrifugal and therefore needs its inlet below the water line, because dry it will neither prime nor cool.