LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps 24 V Transfer Pump with Wiring and 220 V Adapter 14 mm Hose Fittings Flow Rate 800 l/h Head 7 m Power Consumption 26 W IP68 Rating Black
24 V Transfer Pump with Wiring and 220 V Adapter 14 mm Hose Fittings Flow Rate 800 l/h Head 7 m Power Consumption 26 W IP68 Rating Black

24 V Transfer Pump with Wiring and 220 V Adapter 14 mm Hose Fittings Flow Rate 800 l/h Head 7 m Power Consumption 26 W IP68 Rating Black

The set also includes a 220 V adapter, so you just need to connect the hose. The stronger design handles 800 l/h, a head of seven metres, and a hose diameter of 14 mm. Full description
In stock
€68.08
Safe shopping Safe shopping
Overview
24 V Transfer Pump with Wiring and 220 V Adapter 14 mm Hose Fittings Flow Rate 800 l/h Head 7 m Power Consumption 26 W IP68 Rating Black

The set includes a 24 V pump and a 220 V mains adapter, allowing the circuit to be operated without the need for an additional power source. The power cable runs from the body, which can be connected to the output of the adapter; the motor draws 1.1 A and its power consumption reaches 26 W. The flow rate rises to 800 l/h and the head is 7 m, which can handle routes leading to higher floors or elevated tanks. Both the suction and discharge end with brass fittings of 14 mm diameter, onto which the hose is slid and secured with a clamp. The black body has an IP68 rating, noise levels of up to 35 dB, and operates with liquids from -20 °C to 100 °C. Higher voltage means lower current at the same power, so thinner supply lines are sufficient even over longer distances from the source.

  • 220 V Adapter — the package includes a mains power supply that provides the necessary direct current voltage, so the pump is not connected directly to the mains or an alternating current source.
  • 14 mm Fittings — brass ends on both ports hold the hose simply by sliding it on, without threads, adapters, or additional tools.
  • Higher Specifications — a flow rate of 800 l/h and a head of 7 m provide a reserve for longer runs, where the delivered quantity decreases with elevation.
  • Consumption — a draw of 1.1 A and a power consumption of 26 W at 24 V, ensuring smooth operation even during long cycles without significant load on the power source.
  • Durability — an IP68 rating, suitable for environments and liquids from -20 °C to 100 °C, humidity levels up to 90 % RH, and operational noise levels of up to 35 dB.
  • Liquids — water, alcohol, and diesel; the pump cannot handle acids, alkalis, and impurities with magnetically conductive particles larger than 0.35 mm.

Package Contents:

  • 1x 24 V transfer pump
  • 1x 220 V power adapter

The brushless motor has no carbon brushes, so wear is concentrated only on the bearing part and operational life starts at 30,000 hours. The shaft made of stainless steel 316 does not corrode even with prolonged contact with water, which is useful for circuits that remain filled. The chamber must be filled before starting, as running dry will break the impeller. It is better to filter murky water and regularly flush the chamber to prevent sediment and magnetically conductive particles from clogging the rotor. The hose connection holds best with a clamp, as the fitting itself seals only by the pressure of the slid-on hose. The power supply must remain direct current and within the range of 24 V, whether it is the supplied adapter, a battery, or a transformer marked DC.

Price incl. VAT €68.08