Submersible Brushless Pump 24 V with a Head of 7 m and a Flow Rate of 800 l/h with a Power Consumption of 26 W and IP68 Rating with 1/2 Inch Threads
You already have the maximum available quantity in your cart.
Longer distribution or higher lift requires a pump with greater capacity than the twelve-volt version offers. This centrifugal pump with a brushless motor operates at 24 V, draws 1.1 A, and has a power consumption of 26 W. The maximum head reaches 7 m and the maximum flow rate is 800 litres of water per hour. Both inlets have an external thread of 1/2 inch with a diameter of 20 mm and the entire body of the pump is black. The IP68 rating allows for continuous operation underwater and the noise level remains below 35 dB.
Key Features:
- Maximum Head of 7 m — water can rise even two storeys or through a longer horizontal branch
- Flow Rate up to 800 l/h — approximately 13 litres of water per minute with completely free discharge
- Power Consumption of 26 W — draws 1.1 A at twenty-four-volt direct current supply
- Brushless Drive — the motor operates without carbon brushes and their wear
- IP68 Rating — the entire body is designed for permanent immersion in water
- Noise Level below 35 dB — the pump operates below the threshold of 35 decibels
- External Thread of 1/2 Inch — both inlet and outlet with a neck of external diameter 20 mm
- Stainless Steel Shaft — the shaft made of stainless steel 316 withstands permanent contact with water and diesel
- Centrifugal Design — flow rate gradually decreases with increasing lift height
- Temperature Range -20 to 100 °C — applicable for surroundings and pumped liquid
- Humidity up to 90 % RH — operational range of ambient humidity around the pump
- Insulation Test — insulation passed at 1500 V for 60 seconds
- Pumped Media — water, alcohol, diesel, and similar liquids
- Unsuitable Media — acidic and alkaline solutions should not be pumped
- Contaminant Limit — particles larger than 0.35 mm may clog the pumping chamber
- Lifetime over 30,000 Hours — this value applies to continuous operation
- Side Feet — the body has side feet with holes for fastening with screws
- Power Supply Only from DC Source — battery, adapter, or transformer
- Must Be Primed with Water — the pump is not self-priming and must not run dry at any time
Contents of the Package:
- 1x brushless pump
The twenty-four-volt version is suitable where an appropriate power source is available and a higher lift is needed. The head of 7 m is the main difference compared to the twelve-volt version, which ends at five metres. The lower consumption of 1.1 A at a higher voltage also saves on the cross-section of the supply wires and circuit breakers. The 1/2 inch threads on both inlets allow the pump to be integrated into the existing system. Before the first start, it is necessary to prime the chamber with water and never allow the pump to run dry.
Seller: POLARDOS
Dispatched within 1 working day (Mon–Fri) – orders paid for by 14:00 Irish time are processed on the same working day.
Availability: In stock
Transit: 5–13 working days – transit takes place on working days (Mon–Fri).
In total, please allow 5–14 working days from payment of your order.
Delivery is only possible to addresses in Ireland.
Delivery to address: €1.59
Returns
Deadline: 30 days from receipt of the goods, without giving any reason
How: notify us of your withdrawal at info@lunzo.ie and send the goods by post to the returns address:
Rotonda Rene Descartes, Parcela 101 – Nave 3
28070 Alcala de Henares, Madrid
Spain
Once you have sent the parcel, send us the proof of dispatch with the tracking number to info@lunzo.ie – this lets us process your return as quickly as possible and refund you without waiting for the parcel to arrive.
Product condition: you can also return goods that have been used or unpacked, or that no longer have their original packaging or tags
Costs: you pay the postage for sending the goods back to Spain; we charge no return fee
Refund: within 14 days of receiving your notice of withdrawal; we may withhold the refund until the goods have arrived back or until you provide proof that you have sent them
Exchanges
Deadline: 30 days from receiving your parcel (exchange for a different size, colour or variant)
How: write to us at info@lunzo.ie, giving your order number and the variant you want – once we have checked that it is available, we will send you instructions for the exchange, including the address to which you should send the original item
Costs: you pay to send the original item back; the new variant will be sent to you at no further charge
Faulty or damaged goods
Period for claiming a fault: up to six years from delivery of the goods – within the first 30 days you can reject a faulty product and ask for a full refund, and for the first 12 months a fault is presumed to have been present on delivery
How: write to us at info@lunzo.ie and attach a photograph or a video of the goods – in most cases you do not have to send the goods back
Remedies: a replacement with a new item, a reasonable price reduction, or a refund of the full purchase price
You will find the details in Delivery and Payment, Returns and Exchanges, Faulty Goods.
Seller:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
Manufacturer:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
EU responsible person:
SELLERCROSS LTD
Address: 200 rue de la Croix Nivert, 75015 Paris, France
E-mail: info@sellercross.com
Telephone: +33 7 80 95 16 88