Brushless Submersible Pump 24 V with DC Connector and Flow Rate of 800 l/h with a Lift of 7 m and Power Consumption of 26 W with IP68 Rating in Black
You already have the maximum available quantity in your cart.
The brushless submersible pump is designed for the distribution and circulation of water in circuits powered by a 24 V direct current. The brushless motor has a lifespan of over 30,000 hours of operation, eliminating the need for regular replacement of worn parts. The power cable is fitted with a DC connector, allowing for quick connection without the need to splice loose wires during installation. The centrifugal impeller can move up to 800 litres of liquid per hour and can push it to a height of seven metres. The entire body is black, with mounting brackets on the sides featuring holes, and it can be submerged underwater during operation.
- Flow rate of up to 800 litres per hour when powered by 24 V
- Maximum lift height reaches 7 metres above the surface of the pumped liquid
- Power consumption of 26 W corresponds to a current draw of 1.1 A from the source
- Brushless motor operates without carbon brushes, which typically wear out
- The power cable is fitted with a DC connector for quick connection to the source
- IP68 rating allows for continuous operation of the entire body underwater
- Noise level during normal operation does not exceed 35 dB
- Both the inlet and outlet ports have an external thread of 1/2 inch, or 20 mm
- Shaft made of 316 stainless steel withstands continuous contact with the liquid
- Centrifugal pumping principle with an impeller enclosed within the body
- Temperature of the pumped liquid and surrounding environment from -20 to 100 °C
- Operation can withstand relative humidity of up to 90 %
- Insulation tested with a test voltage of 1500 V for 60 seconds
- In addition to water, it can also pump alcohol or diesel
- Acidic and alkaline solutions must not be pumped
- Impurities larger than 0.35 mm may damage the impeller
- Side brackets with holes allow for secure attachment to a base
- The pump is exclusively connected to a 24 V direct current source
- Before the first start-up, the pump must be filled with liquid
- The pump is not self-priming and must not run dry
- Brushless construction reduces mechanical wear on the drive
- The body, mounting brackets, and power cable are in a black finish
- One pump can be used for both circulation and transferring between tanks
Contents of the package:
1x brushless submersible pump
The combination of low power consumption of 26 W and a flow rate of 800 l/h is suitable where only a direct current source is available and reliable liquid circulation is needed. The submersible design saves space as the pump operates directly in the tank, eliminating the need for a separate suction pipe and its sealing. The ports with an external thread of 1/2 inch can be connected with standard hose fittings or reducers, making the construction of the circuit quick. It finds application in fountains, ponds, cooling circuits, and in mobile water distribution systems powered by batteries. The quiet operation and durable casing also allow the pump to run continuously without operator intervention, as long as it remains permanently submerged.
Seller: POLARDOS
Dispatched within 1 working day (Mon–Fri) – orders paid for by 14:00 Irish time are processed on the same working day.
Availability: In stock
Transit: 5–13 working days – transit takes place on working days (Mon–Fri).
In total, please allow 5–14 working days from payment of your order.
Delivery is only possible to addresses in Ireland.
Delivery to address: €1.59
Returns
Deadline: 30 days from receipt of the goods, without giving any reason
How: notify us of your withdrawal at info@lunzo.ie and send the goods by post to the returns address:
Rotonda Rene Descartes, Parcela 101 – Nave 3
28070 Alcala de Henares, Madrid
Spain
Once you have sent the parcel, send us the proof of dispatch with the tracking number to info@lunzo.ie – this lets us process your return as quickly as possible and refund you without waiting for the parcel to arrive.
Product condition: you can also return goods that have been used or unpacked, or that no longer have their original packaging or tags
Costs: you pay the postage for sending the goods back to Spain; we charge no return fee
Refund: within 14 days of receiving your notice of withdrawal; we may withhold the refund until the goods have arrived back or until you provide proof that you have sent them
Exchanges
Deadline: 30 days from receiving your parcel (exchange for a different size, colour or variant)
How: write to us at info@lunzo.ie, giving your order number and the variant you want – once we have checked that it is available, we will send you instructions for the exchange, including the address to which you should send the original item
Costs: you pay to send the original item back; the new variant will be sent to you at no further charge
Faulty or damaged goods
Period for claiming a fault: up to six years from delivery of the goods – within the first 30 days you can reject a faulty product and ask for a full refund, and for the first 12 months a fault is presumed to have been present on delivery
How: write to us at info@lunzo.ie and attach a photograph or a video of the goods – in most cases you do not have to send the goods back
Remedies: a replacement with a new item, a reasonable price reduction, or a refund of the full purchase price
You will find the details in Delivery and Payment, Returns and Exchanges, Faulty Goods.
Seller:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
Manufacturer:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
EU responsible person:
SELLERCROSS LTD
Address: 200 rue de la Croix Nivert, 75015 Paris, France
E-mail: info@sellercross.com
Telephone: +33 7 80 95 16 88