LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps 12 V Circulation Pump with DC Connector and 220 V Adapter 14 mm Hose Barbs Flow Rate 700 l/h Head 5 m Power Consumption 14 W IP68 Black
12 V Circulation Pump with DC Connector and 220 V Adapter 14 mm Hose Barbs Flow Rate 700 l/h Head 5 m Power Consumption 14 W IP68 Black

12 V Circulation Pump with DC Connector and 220 V Adapter 14 mm Hose Barbs Flow Rate 700 l/h Head 5 m Power Consumption 14 W IP68 Black

Power supply disconnects directly at the connector and the 220 V source is included. The 14 mm barbs fit standard hoses, with a flow rate of 700 l/h and a head of five metres. Full description
In stock
€67.64
Safe shopping Safe shopping
Overview
12 V Circulation Pump with DC Connector and 220 V Adapter 14 mm Hose Barbs Flow Rate 700 l/h Head 5 m Power Consumption 14 W IP68 Black

The 12 V circulation pump comes with a 220 V mains adapter and the power cable ends with a DC connector that can be disconnected without tools. The motor draws 1.4 A, its power consumption remains at 14 W and it can move up to 700 l of liquid per hour. The head reaches 5 m, making the assembly suitable for shorter circuits or transferring to a higher container. Both the suction and discharge are fitted with brass barbs with a diameter of 14 mm, onto which the hose is attached and secured with a clamp. The black body has an IP68 rating, operates with a noise level of up to 35 dB and can withstand liquids and environments from -20 °C to 100 °C. The brushless design eliminates the need for replacement parts, so maintenance is limited to clean liquid and an unobstructed chamber.

  • Included Power Supply — the 220 V adapter provides the direct current voltage on which the motor runs, eliminating the need to search for and select a suitable power source.
  • Detachable Supply — the DC connector allows the pump to be disconnected and reconnected in seconds, without screw terminals or wiring connections.
  • 14 mm Barbs — brass fittings on both ends hold the hose simply by pushing on, with the clamp ensuring the connection does not slip under pressure.
  • Performance Data — flow rate of up to 700 l/h, head of 5 m, current draw of 1.4 A and power consumption of 14 W, with the delivered quantity decreasing with elevation.
  • Durability — IP68 rating, liquid and ambient temperature from -20 °C to 100 °C, humidity up to 90 % RH and a shaft made of stainless steel 316.
  • Media — water, alcohol and diesel; acidic and alkaline solutions and impurities with particles larger than 0.35 mm will damage the pump.

Package Contents:

  • 1x 12 V circulation pump with DC connector
  • 1x 220 V power adapter

The brushless motor has a operational life of 30,000 hours, making it suitable for regular daily use. The chamber must be filled with liquid before starting, as running dry will destroy the impeller before anyone notices. It is advisable to filter water with sediments and occasionally flush the chamber, otherwise magnetically conductive particles may settle near the rotor. The adapter cable is routed so that the weight of the hoses does not rest on the connector, nor is there a sharp bend that would stress the connection. The power supply must remain direct current and within the specified range of 12 V, whether using the supplied adapter, a battery or another source marked DC. Quiet operation, low consumption and a durable black body make this assembly a practical solution for smaller domestic circuits.

Price incl. VAT €67.64