Brushless Submersible Pump 12 V with Power Consumption of 14 W and Flow Rate of 700 l/h with a Lift of 5 m and IP68 Rating in Black with 1/2 Inch
You already have the maximum available quantity in your cart.
Enhancing showers, circulating hot water or transferring in off-grid systems requires a quiet and durable pump. This centrifugal pump with a brushless motor operates at 12 V with a power consumption of 14 W and a current draw of 1.4 A. The maximum flow rate is 700 litres of water per hour and the maximum lift reaches 5 m, which is approximately one floor. Both the inlet and outlet have an external thread of 1/2 inch with a diameter of 20 mm and the body is entirely black. The IP68 rating allows for continuous immersion and the noise level does not exceed 35 dB.
Key Features:
- Flow Rate up to 700 l/h — just under 12 litres of water per minute with completely free discharge
- Maximum Lift 5 m — water can reach a floor above in household piping
- Power Consumption 14 W — current draw of 1.4 A at twelve-volt DC power supply
- Brushless Motor — drive without carbon brushes that wear out over time
- IP68 Rating — construction allows for continuous operation of the entire body underwater
- Noise Level up to 35 dB — operation remains below 35 decibels
- 1/2 Inch Threads — both inlet and outlet with external thread of 20 mm diameter
- Stainless Steel Shaft — shaft is made of 316 stainless steel resistant to water
- Centrifugal Principle — as lift increases, flow gradually decreases
- Operating Temperature -20 to 100 °C — range for both the environment and the pumped medium
- Moisture Resistance — ambient humidity up to 90 % RH is within operational range
- Insulation Test — insulation passed at 1500 V for 60 seconds
- Pumped Medium — the pump can handle water, alcohol, and diesel
- Medium Limitations — unsuitable for acidic or alkaline solutions
- Water Purity — impurities over 0.35 mm should not enter the pump
- Service Life — the pump is rated for over 30,000 hours of operation
- Mounting Feet — the body features side feet with holes for securing with screws
- Operation Only on DC Voltage — the source must be DC, not 230 V mains
- No Self-Priming — the pump must not run dry and must be filled with water
Contents of the Package:
- 1x brushless pump
The pump is aimed at setups where a DC power source is available and noise level is a consideration. IP68 Rating allows the pump to operate continuously submerged, which is not a given for centrifugal pumps. The 1/2 inch threads on both ports mean that the pump can be inserted into existing piping without additional reducers. Temperature range of -20 to 100 °C also covers hot water in the heater circuit. Before starting, the pump must be filled with water as it does not have a self-priming function and must not run dry.
Seller: POLARDOS
Dispatched within 1 working day (Mon–Fri) – orders paid for by 14:00 Irish time are processed on the same working day.
Availability: In stock
Transit: 5–13 working days – transit takes place on working days (Mon–Fri).
In total, please allow 5–14 working days from payment of your order.
Delivery is only possible to addresses in Ireland.
Delivery to address: €1.59
Returns
Deadline: 30 days from receipt of the goods, without giving any reason
How: notify us of your withdrawal at info@lunzo.ie and send the goods by post to the returns address:
Rotonda Rene Descartes, Parcela 101 – Nave 3
28070 Alcala de Henares, Madrid
Spain
Once you have sent the parcel, send us the proof of dispatch with the tracking number to info@lunzo.ie – this lets us process your return as quickly as possible and refund you without waiting for the parcel to arrive.
Product condition: you can also return goods that have been used or unpacked, or that no longer have their original packaging or tags
Costs: you pay the postage for sending the goods back to Spain; we charge no return fee
Refund: within 14 days of receiving your notice of withdrawal; we may withhold the refund until the goods have arrived back or until you provide proof that you have sent them
Exchanges
Deadline: 30 days from receiving your parcel (exchange for a different size, colour or variant)
How: write to us at info@lunzo.ie, giving your order number and the variant you want – once we have checked that it is available, we will send you instructions for the exchange, including the address to which you should send the original item
Costs: you pay to send the original item back; the new variant will be sent to you at no further charge
Faulty or damaged goods
Period for claiming a fault: up to six years from delivery of the goods – within the first 30 days you can reject a faulty product and ask for a full refund, and for the first 12 months a fault is presumed to have been present on delivery
How: write to us at info@lunzo.ie and attach a photograph or a video of the goods – in most cases you do not have to send the goods back
Remedies: a replacement with a new item, a reasonable price reduction, or a refund of the full purchase price
You will find the details in Delivery and Payment, Returns and Exchanges, Faulty Goods.
Seller:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
Manufacturer:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
EU responsible person:
SELLERCROSS LTD
Address: 200 rue de la Croix Nivert, 75015 Paris, France
E-mail: info@sellercross.com
Telephone: +33 7 80 95 16 88