LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps Silent Water Pump 12 V with DC Connector 220 V Adapter Included 16 mm Couplings Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black
Silent Water Pump 12 V with DC Connector 220 V Adapter Included 16 mm Couplings Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

Silent Water Pump 12 V with DC Connector 220 V Adapter Included 16 mm Couplings Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

Connection is easy for everyone: plug into the adapter and attach the hose to the 16 mm couplings. Seven hundred litres per hour, five metres lift, and a consumption of only 14 watts. Full description
In stock
€72.01
Safe shopping Safe shopping
Overview
Silent Water Pump 12 V with DC Connector 220 V Adapter Included 16 mm Couplings Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

The silent water pump operates on 12 V and comes with a 220 V mains adapter, whose cable plugs into the DC connector on the input. Disconnecting takes just a second and requires no screwing or connecting wires. The motor draws 1.4 A, its power consumption reaches 14 W, and the pump can move up to 700 l of liquid to a height of 5 m per hour. Both the suction and discharge are fitted with brass couplings with a diameter of 16 mm and a sealing ring, allowing the hose to be attached without tools. The noise level does not exceed 35 dB, the black body has an IP68 rating, and the temperature range from -20 °C to 100 °C allows for pumping both cold and hot liquids. The brushless drive has no parts that wear out, ensuring the assembly can withstand long continuous cycles.

  • Connection via connector — The DC connector links the pump to the adapter in seconds and can be just as quickly disconnected for transport or servicing.
  • Set with adapter — The 220 V power source is included, eliminating the need to select power based on voltage and current, making the pump immediately operational.
  • 16 mm couplings — Brass fittings with a sealing ring on both ends hold the hose securely and can be disassembled without a wrench or tape.
  • Operating parameters — Flow rate up to 700 l/h, lift 5 m, current draw 1.4 A, and power consumption 14 W when powered by 12 V.
  • Durability — Brushless motor with a service life of over 30,000 hours and a shaft made of stainless steel 316, which withstands constant contact with water.
  • Conditions and media — IP68 rating, humidity up to 90 % RH, water, alcohol, and diesel without acids, caustics, and particles over 0.35 mm.

Package contents:

  • 1x 12 V water pump with DC connector
  • 1x 220 V power adapter

The chamber must be filled with liquid before starting, as running without water will damage the impeller in no time. It is advisable to filter murky water and occasionally flush the chamber to prevent sediment and magnetically conductive particles over 0.35 mm from remaining inside. Low noise up to 35 dB makes the pump a suitable choice where louder equipment would be disruptive, such as in the living area of a house. The adapter cable is routed freely to ensure the connector does not bear the weight of the hoses or sharp bends. The power supply must remain direct current within the range of 12 V, meaning the supplied adapter, battery, or transformer must be marked DC. The compact black body with 16 mm couplings fits neatly next to the tank or under the worktop.

Price incl. VAT €72.01