LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps Brushless Pump 12 V with DC Connector and 220 V Adapter 1/2 Inch Thread 20 mm Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black
Brushless Pump 12 V with DC Connector and 220 V Adapter 1/2 Inch Thread 20 mm Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

Brushless Pump 12 V with DC Connector and 220 V Adapter 1/2 Inch Thread 20 mm Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

Includes a 220 V mains adapter, simply plug it into the socket. It can handle 700 litres per hour, with a lift of 5 m and the threads are 1/2 inch. Full description
In stock
€63.28
Safe shopping Safe shopping
Overview
Brushless Pump 12 V with DC Connector and 220 V Adapter 1/2 Inch Thread 20 mm Flow Rate 700 l/h Lift 5 m Power Consumption 14 W IP68 Rating Black

The set includes both the pump and a 220 V mains adapter, so the circuit starts immediately upon plugging it into the socket. The supply connects to the body via a DC connector, which can be disconnected without tools, for example, when transporting the pump or replacing the power source. Both the suction and discharge are fitted with an external 1/2 inch thread with a diameter of 20 mm, onto which a hose fitting or adapter can be screwed. The pump can transport up to 700 litres per hour to a height of 5 m while drawing 1.4 A and 14 W. The black body has an IP68 rating, noise does not exceed 35 dB, and it can handle temperatures from -20 °C to 100 °C, making it suitable for both cold and heated liquids. The brushless motor does not require regular replacement of consumable parts, so the assembly is ready for long cycles in a closed circuit.

  • Adapter included — the 220 V power supply provides the necessary direct current, so a separate power source is not necessary.
  • DC connector — the supply can be disconnected and connected with one movement, without screwing or connecting individual wires.
  • 1/2 inch thread — external thread with a diameter of 20 mm for both suction and discharge, the connection can be sealed with tape or a gasket depending on the fitting.
  • Specifications — flow rate 700 l/h, lift 5 m, consumption 1.4 A and power consumption 14 W at 12 V, the transported amount decreases with increasing height.
  • Durability — IP68 rating, liquid and ambient temperature from -20 °C to 100 °C, humidity up to 90 % RH, noise level up to 35 dB, and a shaft made of stainless steel 316.
  • Liquids — water, alcohol, and diesel; the pump cannot handle acids, alkalis, and impurities with particles larger than 0.35 mm.

Package Contents:

  • 1x brushless pump 12 V with DC connector
  • 1x power adapter 220 V

The pump should never be connected directly to the mains; the necessary direct current is provided by the supplied adapter or another source marked DC. Before each start, the chamber must be filled with liquid, as running dry will quickly damage the impeller. Water with sediments should be filtered before pumping, and the chamber should be cleaned before it retains magnetically conductive particles. The operational life starts at 30,000 hours, so the assembly can withstand daily use for an extended period. It is advisable to route the adapter cable so that the weight of the hoses does not press on the connector or bend at a sharp angle. The compact black body with a 1/2 inch thread fits into tight spaces and can be connected to the existing system without further modifications.

Price incl. VAT €63.28