LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Small 12 and 24 V pumps 12 V Water Pump with Wiring and 220 V Adapter Brushless Motor 14 mm Hose Fittings Flow Rate 700 l/h Lift 5 m IP68 Rating Black
12 V Water Pump with Wiring and 220 V Adapter Brushless Motor 14 mm Hose Fittings Flow Rate 700 l/h Lift 5 m IP68 Rating Black

12 V Water Pump with Wiring and 220 V Adapter Brushless Motor 14 mm Hose Fittings Flow Rate 700 l/h Lift 5 m IP68 Rating Black

The 220 V adapter is included, making the assembly complete. The brass 14 mm fittings fit standard hoses, with a performance of 700 l/h and a lift of five metres. Full description
In stock
€68.52
Safe shopping Safe shopping
Overview
12 V Water Pump with Wiring and 220 V Adapter Brushless Motor 14 mm Hose Fittings Flow Rate 700 l/h Lift 5 m IP68 Rating Black

The water pump comes with a 220 V power adapter, so there is no need to source a separate DC power supply. The power cable runs from the body, the motor operates at 12 V, draws 1.4 A, and has a power consumption of 14 W. The pump can move up to 700 l of liquid per hour and can lift it up to 5 m. Both the inlet and outlet have brass hose fittings with a diameter of 14 mm, which can be attached to the hose and secured with a clamp. The black body has an IP68 rating, noise levels remain below 35 dB, and it can handle temperatures ranging from -20 °C to 100 °C, making it suitable for both cold and hot water. The brushless motor has no parts that wear down during operation, allowing the assembly to be operated in long cycles.

  • Adapter included — the 220 V power supply converts the voltage to the DC required by the motor, making the pump ready for operation.
  • 14 mm fittings — brass fittings for both suction and discharge allow for easy hose attachment without the need for screws or additional adapters.
  • Brushless motor — without carbon brushes that would wear down, with a operational life of over 30,000 hours and a shaft made of stainless steel 316.
  • Pumping specifications — flow rate of 700 l/h, lift of 5 m, power consumption of 14 W and a draw of 1.4 A at 12 V, with the amount delivered decreasing with height.
  • IP68 rating — the body withstands moisture and splashes, with liquid and ambient temperatures from -20 °C to 100 °C, and humidity up to 90 % RH.
  • Suitable liquids — water, alcohol, and diesel, but not acids, alkalis, or contaminants with particles larger than 0.35 mm.

Package contents:

  • 1x 12 V water pump
  • 1x 220 V power adapter

The hose connection holds more securely when a clamp is placed over the fitting, as the fitting itself only seals under the pressure of the hose. The chamber must be filled with liquid before starting; otherwise, running dry will damage the impeller in a short time. Murky water should be filtered before pumping, and the chamber should be flushed before any magnetically conductive particles settle in it. With a quiet operation of up to 35 dB and a power consumption of 14 W, this pump is a suitable solution for smaller circuits that run for long hours. The power supply must remain DC, so the supplied adapter, battery, or transformer marked DC is used, and the voltage must be maintained within the range of 12 V. The compact black body with 14 mm fittings fits even into smaller tanks or technical cabinets.

Price incl. VAT €68.52