Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Tile Levelling System Set with Pliers 500 Clips 2.5 mm and 100 Wedges Transparent Clips and Red Wedges Made of PP Plastic for Laying
Tile Levelling System Set with Pliers 500 Clips 2.5 mm and 100 Wedges Transparent Clips and Red Wedges Made of PP Plastic for Laying

Tile Levelling System Set with Pliers 500 Clips 2.5 mm and 100 Wedges Transparent Clips and Red Wedges Made of PP Plastic for Laying

Complete set for even tile laying: levelling pliers and 500 clips with a 2.5 mm joint with 100 wedges. Suitable for floor tiles and wall coverings. Full description
In stock
€79.00
Safe shopping Safe shopping
Overview
Tile Levelling System Set with Pliers 500 Clips 2.5 mm and 100 Wedges Transparent Clips and Red Wedges Made of PP Plastic for Laying

The complete levelling system set includes 500 transparent clips, 100 red wedges, and levelling pliers, providing everything you need for even tile and wall covering installation without steps between tiles. The clips create a joint width of 2.5 mm, suitable for standard tiles as well as tiles with non-rectified edges. Both clips and wedges are made of PP plastic; the clips can be broken off after the adhesive has cured, and the wedges can be cleaned and reused. The package includes levelling pliers with a metal jaw and red handles, which apply equal pressure to the wedge at each clip. This set is ideal for tilers and for larger home renovations in bathrooms, kitchens, or hallways.

The clip is inserted with its foot under the edges of two adjacent tiles, and the wedge is placed into its opening. The pliers are then attached to the clip, and by squeezing the handles, the wedge is pushed forward until the tiles are aligned at the same height. The clips are consumed, while the wedges can be removed after the adhesive has cured and used for the next rows. This means that 500 clips along with 100 wedges will cover a larger area, where the wedges are gradually moved from the finished section further on.

The transparent clips do not obscure the edges of the tiles, allowing you to clearly see how the tiles align during work. The wedges are brightly coloured, making them easy to find on the substrate even after the adhesive has cured. The pliers have a screw with a wing nut and a spring at the top, which returns the handles after each squeeze, allowing for smooth transitions from one clip to the next. Pushing wedges by hand is laborious with hundreds of clips; using pliers makes the work faster and the pressure on the wedge consistent every time.

  • Type – levelling system set with pliers for aligning tiles
  • Joint Width – 2.5 mm
  • Material of Clips and Wedges – PP plastic
  • Clips – transparent, single-use
  • Wedges – red, reusable
  • Pliers – metal jaw and red handles
  • Suitable for – floor tiles and wall coverings
  • Package Contents – 500 transparent levelling clips with a 2.5 mm joint, 100 red wedges, and 1 levelling pliers

Apply adhesive to the substrate, lay the tile, and insert the feet of the clips under its edges, usually four per tile. Place the adjacent tile, insert the wedges into the clip openings, and tighten them with the pliers so that the jaw support rests on the tile. After the adhesive has set, approximately 24 hours later, knock off the top parts of the clips with a rubber mallet in the direction of the joint. Clean the wedges and pliers from adhesive and prepare for the next area.

The set with pliers, 500 clips, and 100 wedges is a practical solution for laying tiles in bathrooms, kitchens, hallways, and living areas. The joint of 2.5 mm helps to align minor differences in the dimensions of individual tiles while maintaining a neat appearance. Red wedges are easily visible on the floor, ensuring that none are missed during cleaning. The pliers save your hands when working with hundreds of clips and will also be useful for future installations. Thus, the set represents a cost-effective solution for achieving a flat and tidy result without height differences.

Price incl. VAT €79.00