Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Tile Leveling System 300 Clips 1 mm 100 Wedges and Pliers Transparent Clips and Red Wedges Set for Flat Tile Installation
Tile Leveling System 300 Clips 1 mm 100 Wedges and Pliers Transparent Clips and Red Wedges Set for Flat Tile Installation

Tile Leveling System 300 Clips 1 mm 100 Wedges and Pliers Transparent Clips and Red Wedges Set for Flat Tile Installation

Complete leveling system with a 1 mm joint for rectified tiles. Clips, wedges, and pliers included in the set for a flat surface without steps between tiles. Full description
In stock
€66.33
Safe shopping Safe shopping
Overview
Tile Leveling System 300 Clips 1 mm 100 Wedges and Pliers Transparent Clips and Red Wedges Set for Flat Tile Installation

This tile leveling system kit contains everything you need to align the edges of tiles during installation: transparent clips, red wedges, and leveling pliers. The clips create a joint width of 1 mm, which is particularly suitable for rectified tiles with precisely ground edges. The package contains 300 clips and 100 wedges, making it sufficient for larger areas of flooring or walls. The system helps keep adjacent tiles at the same height until the adhesive sets. The result is a flat surface without steps and with regular narrow joints.

Each clip measures 33 x 35.5 mm, with a base for insertion under the edges of the tiles and an upper part with a 21 mm wide opening for the wedge. The height from the base to the break point is 17.5 mm. The wedges measure 70 x 18 x 17 mm, and their angled ribbed surface holds securely in the clip opening without slipping. The leveling pliers have a length of 23 cm and an adjustable range of up to 50 mm, allowing you to tighten the wedge evenly and with minimal effort. The narrow 1 mm joint appears discreet on both the floor and the wall, giving a uniform look.

  • Type – leveling system for tile alignment
  • Joint Width – 1 mm
  • Clip Dimensions – 33 x 35.5 mm
  • Wedge Opening – 21 mm
  • Height to Break Point – 17.5 mm
  • Wedge Dimensions – 70 x 18 x 17 mm
  • Pliers Length – 23 cm
  • Pliers Adjustable Range – up to 50 mm
  • Material of Clips and Wedges – plastic
  • Reusable – wedges and pliers yes, clips are single-use
  • Usage – floor tiles and wall coverings
  • Package Contents – 300 transparent leveling clips with a 1 mm joint, 100 red leveling wedges, and 1 leveling pliers

The procedure is simple. Insert the base of the clip under the edge of the tile into fresh adhesive and place the adjacent tile. Insert the wedge into the clip opening and tighten it with the pliers until the edges of both tiles are level. Typically, one tile is secured by four clips with wedges, and more for larger formats. After about 24 hours, when the adhesive has set, you can strike off the top part of the clip with a rubber mallet in the direction of the joint. The bottom part remains hidden under the tile, and the wedges can be reused after cleaning.

The kit with a 1 mm joint is suitable for any tiler or DIY enthusiast looking to lay rectified tiles with minimal joints. You have the pliers, wedges, and clips all in one package, so you don't need to purchase anything separately. The transparent plastic of the clips does not obscure the edges of the tiles, allowing you to see how they align. The wedges and pliers will also be useful for other projects; just purchase new clips. The kit is suitable for bathrooms, kitchens, hallways, and terraces.

Price incl. VAT €66.33