Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Tile Leveling Clips 100 pcs Joint 2 mm Transparent Plastic 33 x 35.5 mm Disposable Clips for Flat Laying of Tiles and Paving
Tile Leveling Clips 100 pcs Joint 2 mm Transparent Plastic 33 x 35.5 mm Disposable Clips for Flat Laying of Tiles and Paving

Tile Leveling Clips 100 pcs Joint 2 mm Transparent Plastic 33 x 35.5 mm Disposable Clips for Flat Laying of Tiles and Paving

Set of 100 transparent leveling clips with a 2 mm joint for laying tiles and paving. Keeps tiles level and helps create uniform joints. Full description
In stock
€24.85
Safe shopping Safe shopping
Overview
Tile Leveling Clips 100 pcs Joint 2 mm Transparent Plastic 33 x 35.5 mm Disposable Clips for Flat Laying of Tiles and Paving

Leveling clips in a pack of 100 are part of a tile leveling system that helps keep adjacent tiles at the same height and with a regular joint. Each clip creates a joint width of 2 mm, making it suitable for areas where you want narrow and even joints. The clips are made of transparent plastic and measure 33 x 35.5 mm. They are used for laying ceramic tiles on floors as well as for wall tiling. The 2 mm joint is one of the most commonly used widths for tiles and cladding in interiors, in bathrooms, kitchens, and hallways.

The clip has a base that fits under the edges of two adjacent tiles, and the top part has an opening of 21 mm, into which the leveling wedge is inserted. After inserting and tightening the wedge, the edges of the tiles are pressed together into one plane and will not shift during the adhesive curing process. The height from the base to the break point is 17.5 mm. The width of the base determines the joint, so all clips in the pack will create an equally wide 2 mm joint across the entire surface.

  • Type – leveling clips for the tile leveling system
  • Joint Width – 2 mm
  • Clip Dimensions – 33 x 35.5 mm
  • Wedge Opening Width – 21 mm
  • Height to Break Point – 17.5 mm
  • Material – plastic
  • Colour – transparent
  • Usage – floor tiles and wall cladding
  • Accessories – leveling wedges and pliers are not included
  • Contents – 100 leveling clips with a 2 mm joint

The procedure is simple. Insert the base of the clip under the edge of the tile into fresh adhesive and place the adjacent tile. Insert the leveling wedge into the clip's opening and tighten it by hand or with leveling pliers. One tile is usually secured with four clips with wedges, and for larger formats, even more. After approximately 24 hours, when the adhesive has set, you can knock off the top part of the clip with a rubber mallet or by kicking it in the direction of the joint. The bottom part will remain hidden under the tile, and the wedges can be reused, while the clips are disposable.

The set of 100 leveling clips with a 2 mm joint is a practical consumable for any tiler or DIY enthusiast looking to achieve a flat surface without steps between tiles. The transparent plastic does not obscure the edges of the tiles, allowing you to see how the tiles align with each other. The 2 mm joint clips are a universal choice for standard laying in both flats and houses. Combine the clips with leveling wedges that fit comfortably into the 21 mm wide opening. With a pack of 100, you will have enough for a small bathroom, kitchen splashback, or to repair part of a floor.

Price incl. VAT €24.85