Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 1
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 1
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 2
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 3
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 4
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 5
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop 6

SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop

Electronic calliper with a resolution of 0.01 mm and data output for measuring external and internal dimensions, depth, and seating. Stored in a sturdy case. Full description
In stock
€72.27
Safe shopping Safe shopping
Overview
SHAHE 5000 Digital Calliper 0–150 mm Silver Housing Accuracy 0.02 mm IP54 Rating Stainless Steel Glass Scale For Workshop

The SHAHE 5000 digital calliper with a range of 0 to 150 mm features a silver electronic housing and a stainless steel ruler, jaws, and depth gauge. The measured dimension is displayed on an LCD screen with a resolution of 0.01 mm, allowing you to read the value instantly without having to take a reading from a vernier scale. It is suitable for checking machined parts, measuring screws, bearings, and pipes, as well as for use in a home workshop. The calliper can measure external and internal dimensions, the depth of holes, and the height of seating. The total length is 235 mm and the external jaws measure 40 mm.

The position of the slider is detected by a glass measuring scale, and the manufacturer states an accuracy of ±0.02 mm. With one button, you can switch the display between millimetres and inches, and the ZERO button allows you to reset the display to zero at any position, enabling you to compare differences between parts. A metal wheel below the display allows fine adjustment of the jaws with your thumb, and a metal locking screw secures them in the desired position. The electronics with an IP54 rating resist dust and splashing water, and there is a data output connector on the top side.

  • Model – SHAHE 5000
  • Measurement Range – 0 to 150 mm (0 to 6 inches)
  • Resolution – 0.01 mm
  • Accuracy – ±0.02 mm
  • Total Length – 235 mm
  • Length of External Jaws – 40 mm
  • Material – stainless steel, plastic housing for electronics in silver colour
  • Rating – IP54
  • Display – LCD, units in millimetres and inches
  • Position Detection – glass measuring scale
  • Measuring Modes – external and internal dimensions, depth, seating
  • Controls – silicone ON/OFF, ZERO, and unit switching buttons
  • Included Accessories – data output, metal locking screw, metal wheel for fine adjustment, and conversion table on the back
  • Power Supply – battery (not included)
  • Package Contents – digital calliper, plastic case, manual, and cardboard box

After use, turn off the calliper and store it in the included plastic case, which protects it from impacts, dust, and scratches on the display. Keep the measuring surfaces of the jaws clean and wipe them with a dry cloth. The battery is inserted under the round cap on the front of the housing, which opens by twisting. If the calliper is not used for an extended period, remove the battery. Before each measurement, close the jaws and ensure that the display shows zero; otherwise, reset it using the ZERO button. Do not use the jaws for marking or as a lever, as they may become damaged.

The SHAHE 5000 digital calliper is a practical measuring tool for engineering, locksmithing, carpentry, automotive service, and modelling. The stainless steel construction, glass scale, and IP54 rating allow reliable operation even in demanding workshop environments. Four measuring methods cover most common tasks without the need for additional tools. The silver electronic housing distinguishes it from other callipers on the workbench. The range of 150 mm is sufficient for the vast majority of smaller parts and components.

Price incl. VAT €72.27