Home page Home page Mobile Phones, Smartwatches & Tablets Mobile Phone Accessories NFC tags and stickers Set of 10 Transparent NFC Tags NTAG213 Wet Inlay Round Self-Adhesive 25 mm Rewritable Chip 144 Bytes 13.56 MHz for Smart Home
Set of 10 Transparent NFC Tags NTAG213 Wet Inlay Round Self-Adhesive 25 mm Rewritable Chip 144 Bytes 13.56 MHz for Smart Home

Set of 10 Transparent NFC Tags NTAG213 Wet Inlay Round Self-Adhesive 25 mm Rewritable Chip 144 Bytes 13.56 MHz for Smart Home

Ten round NFC tags wet inlay with NTAG213 chip and adhesive layer. Thin transparent film that can easily be hidden under a label, cover, or print. Full description
In stock
€20.48
Safe shopping Safe shopping
Overview
Set of 10 Transparent NFC Tags NTAG213 Wet Inlay Round Self-Adhesive 25 mm Rewritable Chip 144 Bytes 13.56 MHz for Smart Home

The set of ten transparent NFC tags wet inlay allows you to connect your phone with items in your home, car, and office. Each tag consists of a thin PET film with a round antenna of 25 mm diameter and a NTAG213 chip, with an adhesive layer on the back. The tags are supplied blank on a backing strip, and you can write content to them using your phone with an NFC-compatible app. When you bring your phone close, the action you have set up will be triggered. Ten pieces are sufficient for a variety of locations where you want quick shortcuts at hand.

The wet inlay design does not have a paper top layer, making the tag lightweight, thin, and almost invisible. You can stick it on the back of a picture, under a mat, inside a box, or cover it with your own label. The chip operates at a frequency of 13.56 MHz and offers a memory of 144 bytes, which is enough for a link, contact, number, short message, or command for phone automation. The recorded content can be overwritten, so you can later use the tag for a different purpose. For writing and reading, a standard smartphone with NFC enabled and a freely available app is sufficient; no additional devices or special readers are required.

  • Tag Type – wet inlay, transparent self-adhesive film
  • Chip – NTAG213
  • Memory – 144 bytes
  • Frequency – 13.56 MHz
  • Protocol – ISO/IEC 14443 Type A
  • Diameter – 25 mm
  • Material – PET
  • Appearance – transparent tag with visible silver antenna
  • Reading Distance – 0 to 10 cm
  • Usage – smart home, Wi-Fi, navigation, contact sharing, product labeling
  • Package Contents – 10 blank transparent self-adhesive NFC tags NTAG213 wet inlay with a diameter of 25 mm

Typical uses are straightforward. A tag by the door can connect guests to Wi-Fi without entering a password when the phone is brought close, a tag in a holder in the car can launch navigation, and a tag on a box or product can open a page with instructions or information. Creating a music wall is also popular, where bringing your phone close to an album cover starts its playback. Before sticking, clean and degrease the surface, carefully peel the tag from the strip and press it down flat. When reading, the phone must have NFC enabled.

The set of 10 transparent NFC tags NTAG213 is suitable for home automation, small DIY projects, and labelling your own products. The tags comply with the ISO/IEC 14443 Type A standard, and a phone can read them from a distance of up to 10 cm. Thanks to the thin transparent film, they can be discreetly hidden under a label, print, or cover. Ten pieces are enough to equip several rooms at once. You can modify the content of the tags at any time from your phone as your needs change.

Price incl. VAT €20.48