Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Mobile Phones, Smartwatches & Tablets Mobile Phone Accessories NFC tags and stickers NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 1
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 1
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 2
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 3
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 4
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards 5

NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards

Thin self-adhesive inlays with a CUID chip compatible with MIFARE S50 1K. You can rewrite Block 0 and UID via MCT on an Android phone, ACR122U or Proxmark 3. Full description
In stock
€26.59
Safe shopping Safe shopping
Overview
NFC Stickers CUID 10 pcs With Rewriteable UID and Block 0 Rectangle 13 x 28 mm Chip S50 1K 13.56 MHz Wet Inlay For Backup of RFID Cards

The package contains 10 thin NFC stickers with a CUID chip, which behaves like a standard IC card S50 1K and also allows rewriting Block 0 with the UID identifier. The stickers are therefore popular for backing up access cards, chips for entrance doors, or attendance cards. The rectangular format measuring 13 x 28 mm fits even smaller key fobs and plastic cards. The labels operate at a frequency of 13.56 MHz according to the ISO 14443 Type A protocol. The wet inlay design means that the chip with the antenna is encapsulated in a thin self-adhesive film without a printed top layer.

The stickers are supplied on a white backing tape, from which they can be easily peeled off. The memory has a capacity of 1 KB EEPROM and the label content can be rewritten up to 100,000 times. To write the UID, use an Android phone with the Mifare Classic Tools (MCT) application or a device that supports CUID, including ACR122U, Proxmark 3, PM5, 300CD, X100 and iCopy 3, 5 and 8 copiers. According to the seller, standard RFID copiers at 13.56 MHz cannot write to CUID cards, so please verify support in advance. The default access key is FFFFFFFFFFFF.

  • Chip – CUID with S50 1K standard and rewriteable Block 0 with UID
  • Operating frequency – 13.56 MHz
  • Protocol – ISO 14443 Type A
  • Memory capacity – 1 KB EEPROM
  • Rewritability – up to 100,000 cycles
  • Modulation – ASK, Manchester encoding
  • Reading range – 0 to 10 cm depending on the reader
  • Label size – 13 x 28 mm
  • Material – self-adhesive PE film and coated paper
  • Default key – FFFFFFFFFFFF
  • Supported writers – MCT on Android, ACR122U, Proxmark 3, PM5, 300CD, X100 and iCopy 3, 5 and 8
  • Package contents – 10 self-adhesive NFC stickers CUID measuring 13 x 28 mm

Before applying, clean and dry the surface where you will place the sticker, and ensure that the label does not bend or crease, as this could damage the antenna. They adhere best to smooth plastic, glass or paper surfaces. When reading and writing, hold the sticker as close as possible to the reader or the NFC antenna area of the phone. We recommend keeping a record of which UID you have uploaded to which sticker.

Ten rectangular NFC stickers CUID are a practical supply for home or a small office, where it is necessary to back up several access cards. The chip compatible with the S50 1K standard and changeable UID allows you to create a functional copy of a chip operating at 13.56 MHz. The thin self-adhesive design is almost imperceptible on a card or key fob. The long memory lifespan allows the same label to be repeatedly rewritten for another chip. With the MCT application or a compatible reader, you can thus manage the backup of RFID cards yourself and in the comfort of your home.

Price incl. VAT €26.59