Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials Hot Melt Glue Gun 500 W Digital Temperature Control 100 to 220 °C Long Nozzle 2.0 x 42.5 mm Stand and 5 Sticks 11 mm For Joints
Hot Melt Glue Gun 500 W Digital Temperature Control 100 to 220 °C Long Nozzle 2.0 x 42.5 mm Stand and 5 Sticks 11 mm For Joints

Hot Melt Glue Gun 500 W Digital Temperature Control 100 to 220 °C Long Nozzle 2.0 x 42.5 mm Stand and 5 Sticks 11 mm For Joints

Digital hot glue gun with a long copper nozzle for gluing in joints and gaps. Temperature display, metal stand, and 5 sticks included. Full description
In stock
€113.06
Safe shopping Safe shopping
Overview
Hot Melt Glue Gun 500 W Digital Temperature Control 100 to 220 °C Long Nozzle 2.0 x 42.5 mm Stand and 5 Sticks 11 mm For Joints

The hot melt glue gun with a power of 500 W and a long replacement nozzle is designed for gluing in places where a standard short nozzle cannot reach. You can set the temperature on the digital display within the range of 100 to 220 °C and the value is visible throughout the work. The gun works with glue sticks with a diameter of 11 mm and heats up in approximately 2 to 4 minutes. You dispense the glue using the trigger, and you can adjust its flow with a rotary screw at the back of the gun. The package includes a replacement long nozzle, a metal stand, and five sticks.

The long copper nozzle has an opening of 2.0 mm and a length of 42.5 mm. The slim and longer tip reaches into joints, gaps between parts, holes, or internal corners while still allowing good visibility of the joint area. The smaller opening dispenses glue sparingly, making it suitable for precise joints of wood, plastic, cardboard, textiles, or cables. The nozzles are made of pure copper with good thermal conductivity, and the fitted nozzle is protected by a silicone cover against burns.

  • Type – hot melt glue gun with digital display
  • Power – 500 W
  • Temperature Control – 100 to 220 °C via buttons on the display
  • Heating Time – 2 to 4 minutes
  • Diameter of Sticks – 11 mm
  • Heating Element – PTC
  • Nozzle – pure copper with silicone cover against burns
  • Replacement Nozzle – long, opening 2.0 mm, length 42.5 mm
  • Flow Adjustment – rotary screw on the back of the gun
  • Power Supply – 220 V with European plug
  • Colour – blue with grey elements
  • Package Contents – 1 hot melt glue gun 500 W with fitted nozzle, 1 replacement long copper nozzle 2.0 x 42.5 mm, 1 metal stand, 5 hot melt sticks 11 mm, and a box

Only replace the long nozzle when the gun is cool, and wait until it heats up again to the selected temperature before further gluing. When working in tight spaces, hold the gun so that the hot nozzle does not touch surrounding materials. Between individual joints, place it on the metal stand. After finishing work, turn off the gun using the button on the display, let it cool down, and store it in the box along with the nozzles.

The set with the long nozzle is practical for DIY enthusiasts, model makers, repairers, and for making decorations and packaging where gluing in joints and gaps is required. The power of 500 W and digital temperature control ensure even melting of the glue even during extended use. The longer nozzle allows access to joints inside products without unnecessary disassembly. With five sticks of 11 mm diameter, you can start working immediately after unpacking. The metal stand and silicone cover for the nozzle facilitate safe placement of the gun.

Price incl. VAT €113.06