Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials Hot Glue Gun 50/150 W with Needle Nozzle 1.0 x 40 mm Key and 5 Sticks 11 mm Power Switch for Fine and Precise Gluing
Hot Glue Gun 50/150 W with Needle Nozzle 1.0 x 40 mm Key and 5 Sticks 11 mm Power Switch for Fine and Precise Gluing

Hot Glue Gun 50/150 W with Needle Nozzle 1.0 x 40 mm Key and 5 Sticks 11 mm Power Switch for Fine and Precise Gluing

Hot glue gun with a needle copper nozzle for a fine glue line on small decorations and models. Power selection of 50 or 150 W and 5 sticks included in the package. Full description
In stock
€73.32
Safe shopping Safe shopping
Overview
Hot Glue Gun 50/150 W with Needle Nozzle 1.0 x 40 mm Key and 5 Sticks 11 mm Power Switch for Fine and Precise Gluing

This hot glue gun set is complemented by a needle nozzle 1.0 x 40 mm, which creates a fine and precise glue line. It is therefore suitable for small decorations, jewellery, models, floral arrangements, or repairs of small parts. The gun works with sticks of 11 mm diameter and the switch on the handle allows you to choose a lower or higher power depending on the material. The working temperature range of 160 to 220 °C enables gluing wood, plastic, glass, ceramics, metal, and leather. A key is included for changing the nozzle, and you will also find five glue sticks in the package.

The switch offers settings of 50 W, off, and 150 W. When working delicately with the needle nozzle, you will appreciate the lower power of 50 W, which facilitates control over the amount of glue, while the higher power can be used for larger joints. The PTC heating element heats the gun in approximately 1 to 3 minutes, and the overheating protection maintains a stable temperature. The copper nozzles conduct heat well, ensuring that the glue remains liquid all the way to the tip. An indicator light shows that the gun is switched on, the orange cover on the standard nozzle reduces the risk of burns, and the metal stand holds the gun when set down.

  • Power – 50 W or 150 W with off position
  • Working Temperature – 160 to 220 °C
  • Heating Time – approximately 1 to 3 minutes
  • Glue Flow Rate – 18 to 28 g/min
  • Stick Diameter – 11 mm
  • Needle Nozzle – copper, opening 1.0 mm, length 40 mm
  • Gun Dimensions – 20.5 x 16.5 cm
  • Power Cable – 1.5 m, EU plug
  • Equipment – indicator light, nozzle protective cover, removable metal stand
  • Package Contents – 1 hot glue gun with attached nozzle and stand, 1 needle nozzle 1.0 x 40 mm, 1 nozzle changing key, 5 glue sticks 11 x 150 mm

To attach the needle nozzle, screw it in place of the original tip using the included key. Heat the gun while it is standing on the stand and dispense the glue with a gentle squeeze of the trigger to ensure an even flow from the narrow opening. After use, switch off the gun, allow it to cool on the stand, and remove any glue residue from the nozzle only after it has cooled down.

This set is an ideal choice for creative individuals, modellers, and anyone who needs to glue small parts with care. The needle nozzle with an opening of 1.0 mm helps apply just the right amount of glue needed, limiting overflow around the joint. By switching the power up to 150 W, it can also be used for stronger bonding of wood or plastic. With the included key and five sticks, you can start creating right out of the box. The gun is suitable for home, school, and hobby workshops.

Price incl. VAT €73.32