Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials Hot Glue Gun 50/150 W with Long Nozzle 2.0 x 50 mm Key and 5 Sticks 11 mm Copper Nozzle and Stand for Workshop and Crafting
Hot Glue Gun 50/150 W with Long Nozzle 2.0 x 50 mm Key and 5 Sticks 11 mm Copper Nozzle and Stand for Workshop and Crafting

Hot Glue Gun 50/150 W with Long Nozzle 2.0 x 50 mm Key and 5 Sticks 11 mm Copper Nozzle and Stand for Workshop and Crafting

Hot glue gun set with switchable 50 and 150 W and a replacement long copper nozzle for gluing in joints. A key for changing the nozzle and five sticks are included. Full description
In stock
€70.70
Safe shopping Safe shopping
Overview
Hot Glue Gun 50/150 W with Long Nozzle 2.0 x 50 mm Key and 5 Sticks 11 mm Copper Nozzle and Stand for Workshop and Crafting

This set combines a powerful hot glue gun with a replacement long nozzle 2.0 x 50 mm, allowing you to easily apply glue even in narrower joints and deeper areas. The gun works with sticks with a diameter of 11 mm, and using the switch on the handle, you can choose between lower and higher power. The copper nozzle quickly transfers heat and the glue flows smoothly from it. The working temperature reaches 160 to 220 °C, which is sufficient for wood, plastic, glass, metal, stone, and ceramics. A flat key is included for changing nozzles, and you will also receive five glue sticks to get started.

The switch has settings for 50 W, off, and 150 W. The lower power is suitable for paper, fabric, and small decorations, while the higher power ensures quick melting when gluing bulkier parts. The extended nozzle with an opening of 2.0 mm and a length of 50 mm allows for more precise application of a thin layer of glue, for example, when repairing furniture, models, or frames. The PTC heating element heats the gun in approximately 1 to 3 minutes, and the overheating protection keeps the temperature stable. An indicator light signals when it is on, the orange cover protects against contact with the hot tip, and the removable metal stand keeps the gun in a stable position when set down.

  • Power – switchable 50 W or 150 W
  • Working temperature – 160 to 220 °C
  • Heating time – approximately 1 to 3 minutes
  • Glue flow – 18 to 28 g/min
  • Glue sticks – diameter 11 mm, length 150 mm
  • Replacement nozzle – copper, opening 2.0 mm, length 50 mm
  • Dimensions of the gun – 20.5 x 16.5 cm
  • Cable – 1.5 m with EU plug
  • Gun equipment – power indicator, nozzle protection cover, removable stand
  • Contents of the package – 1 hot glue gun with attached nozzle and stand, 1 long nozzle 2.0 x 50 mm, 1 key for changing nozzles, 5 glue sticks 11 x 150 mm

To change the nozzle, loosen the original tip with the included key and screw on the long nozzle in its place. During heating, let the gun stand on the stand and do not place the tip on the work surface. After finishing work, turn off the gun with the switch, allow it to cool down, and only then clean the nozzle of any glue residue.

This set is suitable for DIY enthusiasts, modellers, and anyone who needs to glue in places where a standard nozzle cannot reach. The gun with a power of up to 150 W quickly melts the glue, and the long copper nozzle allows for clean application even in joints. Thanks to the power switch, it can be used for both fine and coarser tasks in the workshop, home, or during crafting. The included key and five sticks with a diameter of 11 mm ensure that you can start working immediately after unpacking.

Price incl. VAT €70.70