Home page Home page PC & Laptop Accessories Computer Accessories Keyboards Keyboard Accessories Gateron G Pro 3.0 White Linear Switches 100 pcs 3pin Light Actuation 38 gf Factory Lubricated Transparent RGB Housing for 96% Keyboard
Gateron G Pro 3.0 White Linear Switches 100 pcs 3pin Light Actuation 38 gf Factory Lubricated Transparent RGB Housing for 96% Keyboard

Gateron G Pro 3.0 White Linear Switches 100 pcs 3pin Light Actuation 38 gf Factory Lubricated Transparent RGB Housing for 96% Keyboard

Pack of 100 Gateron G Pro 3.0 White linear switches with light actuation and factory lubrication. Sufficient to equip a full 96% keyboard or TKL with some spare. Full description
In stock
€75.50
Safe shopping Safe shopping
Overview
Gateron G Pro 3.0 White Linear Switches 100 pcs 3pin Light Actuation 38 gf Factory Lubricated Transparent RGB Housing for 96% Keyboard

Gateron G Pro 3.0 White linear switches are designed for mechanical keyboards where you want a smooth actuation without a tactile bump and without a click. The white variant is among the lightest switches in the G Pro 3.0 series with an actuation force of 38 ± 15 gf and a bottom-out force of 45 gf, allowing the key to be pressed with minimal effort, reducing finger fatigue during extended typing sessions. The switches feature 3 pins and a cross-shaped MX stem, compatible with most standard keycaps. The pack contains 100 switches, enough to equip a full keyboard layout of 96%, approximately 96 to 100 keys, or a TKL keyboard with some spare.

The third generation G Pro introduces reinforced pins that are more resistant to bending without increasing their thickness. The upper housing is transparent and, according to the manufacturer, better focuses the light, making the switches suitable for keyboards with SMD RGB backlighting, and the light diffuses more evenly under the key compared to the previous version 2.0. The switches are factory lubricated, providing a smooth action right out of the box without the need for additional modification. The pre-travel distance is 2.0 ± 0.6 mm, the total travel distance is up to 4.0 mm, and the spring length is 20 mm.

  • Switch Type – Linear
  • Model – Gateron G Pro 3.0 White
  • Actuation Force – 38 ± 15 gf
  • Bottom-out Force – 45 gf
  • Pre-travel – 2.0 ± 0.6 mm
  • Total Travel – up to 4.0 mm
  • Spring Length – 20 mm
  • Number of Pins – 3
  • Stem – White cross-shaped MX type
  • Housing – Transparent upper housing for SMD backlighting
  • Lubrication – Factory lubricated
  • Mounting – Hot-swap sockets with pin holes or soldering
  • Contents – 100 pcs of Gateron G Pro 3.0 White switches

Before replacing, ensure that the keyboard has hot-swap sockets with pin holes for the switch pins, as they are not compatible with socket types that require clips. Before inserting, check that the pins are straight, and insert the switch perpendicularly and without excessive force to avoid bending the pins. A switch puller, which is not included in the package, is useful for removing the original switches from a hot-swap keyboard.

Gateron G Pro 3.0 White switches are especially appreciated by those who prefer a light press and spend a lot of time at the keyboard. The low actuation force means the key responds to even a slight touch, and the light linear action without a tactile bump is smooth from the start to the end of the travel. Lighter switches are also suitable for those whose fingers tire quickly on stiffer keys. The set of 100 pieces is sufficient for a complete 96% keyboard layout, and more than ten switches will remain as a spare for a TKL keyboard in case of damage. It is a practical choice if you want to convert a keyboard with a numeric keypad into a uniform light linear action in a compact layout. Thanks to the factory lubrication and transparent housing, the switches are ready to use right out of the box and perform well with backlighting.

Price incl. VAT €75.50