Home page Home page PC & Laptop Accessories PC Components Hard Drives Docking Station with 3 Slots for M.2 NVMe and SATA SSDs and 2.5" and 3.5" SATA HDD Offline Cloning USB-C 10 Gb/s Grey for PC and Laptop
Docking Station with 3 Slots for M.2 NVMe and SATA SSDs and 2.5" and 3.5" SATA HDD Offline Cloning USB-C 10 Gb/s Grey for PC and Laptop

Docking Station with 3 Slots for M.2 NVMe and SATA SSDs and 2.5" and 3.5" SATA HDD Offline Cloning USB-C 10 Gb/s Grey for PC and Laptop

External station for M.2 NVMe and SATA SSDs as well as 2.5" and 3.5" SATA drives. Clones drives without a computer and connects to a PC via USB-C with speeds of up to 10 Gb/s. Full description
In stock
€109.56
Safe shopping Safe shopping
Overview
Docking Station with 3 Slots for M.2 NVMe and SATA SSDs and 2.5" and 3.5" SATA HDD Offline Cloning USB-C 10 Gb/s Grey for PC and Laptop

This docking station combines three slots for drives in one compact body and serves as both an external box and a standalone cloner. The top section accommodates M.2 NVMe and M.2 SATA drives in lengths from 2230 to 2280, while the side position is for standard 2.5" and 3.5" SATA HDDs and SSDs. The station connects to a computer or laptop via a USB-C port and achieves data transfer speeds of up to 10 Gb/s for M.2 NVMe drives. It is ideal for backing up and transferring data between drives. No drivers are required; the station works with Windows, Linux, macOS, and Android with OTG support.

A significant advantage is the offline cloning mode, which operates even without a connected computer. By using the switch on the side, you can select the cloning direction, and by holding down the Clone button, you initiate the copying of the entire disk. Cloning from NVMe to SATA and from SATA to NVMe is supported, allowing the content of an M.2 NVMe drive to be transferred to an M.2 SATA drive or to a 2.5" or 3.5" SATA drive, and vice versa. The cloning process is indicated by four lights, each representing 25%. The target drive must have a larger capacity than the source drive. Cloning from M.2 SATA to a 2.5" or 3.5" SATA drive is not supported.

  • Type – docking station and disk cloner with 3 slots
  • Supported Drives – M.2 NVMe (M-Key), M.2 SATA (B+M Key), 2.5" and 3.5" SATA HDDs and SSDs
  • M.2 Drive Lengths – 2230, 2242, 2260, and 2280
  • M.2 Drive Capacity – up to 8 TB
  • Interface – USB-C, USB 3.2 Gen2
  • Transfer Speed – up to 10 Gb/s for M.2 NVMe drives
  • Offline Cloning – NVMe to SATA and SATA to NVMe with direction switch
  • Simultaneous Access – to two drives at once, M.2 NVMe alongside M.2 SATA or with a 2.5" or 3.5" SATA drive
  • Controls – power switch, cloning button, power, drive, and cloning progress indicators
  • Power Supply – 12 V 3 A power adapter with EU plug
  • Compatibility – Windows, Linux, macOS, and Android (OTG)
  • Material – plastic
  • Colour – grey
  • Dimensions – 10.3 x 5.6 x 1.5 cm
  • Package Contents – docking station, USB-C to USB-C data cable with USB-A connector (80 cm), 12 V 3 A power adapter with EU plug, 3 silicone holders for M.2 SSDs, and manual

Using it is straightforward. Insert the drives into the corresponding slots, connect the station to power and to the computer, and turn it on with the switch. If a 2.5" or 3.5" SATA drive and an M.2 SATA drive are inserted simultaneously, the station will only recognise the 2.5" or 3.5" drive, so when working with an M.2 SATA drive, please remove the larger drive. M.2 drives are secured with the included silicone holders, so no tools are required for installation.

The docking station replaces several separate boxes and adapters and is useful both at home and in service. It accommodates M.2 NVMe, M.2 SATA, and 2.5" and 3.5" SATA drives, allowing you to manage most common drives from computers and laptops with a single device. Offline cloning saves time when replacing a drive with a larger or faster model. Power is provided by a 12 V 3 A adapter with an EU plug, which can also handle 3.5" hard drives.

Price incl. VAT €109.56