Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 1
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 1
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 2
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 3
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 4
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 5
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 6
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop 7

Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop

The long depth gauge with a range of 300 mm can handle deep holes and pockets. Readings in hundredths of a millimetre on the LCD, switching between mm and inches, and a locking screw. Full description
In stock
€144.06
Safe shopping Safe shopping
Overview
Digital Depth Gauge SHAHE 5113-300 0–300 mm with Long Stainless Steel Bar Resolution 0.01 mm Accuracy ±0.04 mm LCD Display Case Workshop

The Digital Depth Gauge SHAHE 5113-300 is the largest model in the 5113 series with a measuring range of 0 to 300 mm. It is suitable for measuring deep holes, cylinders, pockets, or the height of tall fittings. The gauge stands on a transverse base measuring 100 mm long, which holds the measuring bar perpendicular to the surface. The result is displayed on an LCD screen with a resolution of 0.01 mm, and it can also be switched to inches. The main body and measuring bar are made of stainless steel, and the position is detected by a capacitive sensor with a glass grid.

The long measuring bar with a range of up to 300 mm is especially appreciated by engineering shops, tool shops, service centres, and workshops that work with larger parts. The manufacturer states an accuracy of ±0.04 mm for this model. The ZERO button allows you to reset the display at any position, enabling direct measurement of the difference between two depths. The locking screw above the display secures the bar once it rests on the bottom, allowing you to read the value even after removing the gauge. The fine adjustment of the bar is facilitated by a thumb wheel, and the data connector is hidden under a cover on the top side of the display. Switching between millimetres and inches is useful when working with drawings in both unit systems.

  • Type – digital depth gauge SHAHE 5113-300
  • Measuring range – 0 to 300 mm / 0 to 12 inches
  • Resolution – 0.01 mm / 0.0005 inches
  • Accuracy – ±0.04 mm
  • Length of gauge – 390 mm
  • Length of base – 100 mm
  • Material – stainless steel, plastic battery cover
  • Sensor – capacitive with glass measuring grid
  • Display – LCD with choice of mm or inches
  • Controls – ON/OFF, ZERO, and in/mm buttons, locking screw, thumb wheel
  • Usage – deep holes, pockets, grooves, and tall fittings
  • Power supply – CR2032 3 V battery with a lifespan of over 1 year (not included)
  • Contents of the package – digital depth gauge and plastic protective case in a cardboard box

Insert the CR2032 battery into the round compartment on the front of the display unit. Before measuring, ensure that there is no dirt on the seating surface of the base or the end of the bar, and press the base flat against the edge of the workpiece. Protect the long bar from bending and dropping. After use, turn off the gauge, clean it, and store it in the case away from moisture and magnetic fields. If the gauge is not used for an extended period, remove the battery from the compartment to prevent leakage and damage to the contacts.

The SHAHE 5113-300 is a digital depth gauge designed for working with large and deep parts. The stainless steel bar measuring 390 mm, stable base, and clear LCD display ensure quick and repeatable measurements. Zeroing, locking, and unit switching cover the common needs of a machine workshop as well as those of a more demanding DIY enthusiast. A sturdy case is included for safe storage.

Price incl. VAT €144.06