Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 1
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 1
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 2
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 3
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 4
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 5
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 6
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case 7

Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case

Depth gauge with a range of 200 mm for deep holes, grooves, and fittings. Digital LCD readout, zeroing at any position, and locking of the bar with a screw. Full description
In stock
€109.13
Safe shopping Safe shopping
Overview
Digital Depth Gauge SHAHE 5113-200 0–200 mm Resolution 0.01 mm Accuracy ±0.03 mm Stainless Steel Measuring Bar Base 100 mm LCD Case

The SHAHE 5113-200 Digital Depth Gauge offers a measuring range of 0 to 200 mm, which covers deeper holes, pockets, and grooves in workpieces. The gauge rests on a cross base measuring 100 mm long, ensuring the measuring bar is perpendicular to the surface. The value is read directly from the LCD display with a resolution of 0.01 mm and can be switched to inches with the press of a button. Both the body of the gauge and the bar are made from stainless steel. A capacitive sensor with a glass measuring grid takes care of position detection.

The 200 mm model is a popular medium size for machine workshops, maintenance, mould production, and for DIY enthusiasts working with metal, wood, or plastic. The manufacturer specifies an accuracy of ±0.03 mm for this model. The ZERO function resets the display at any position, allowing measurements of the difference between two levels without recalculation. The locking screw secures the bar so that the measured value does not shift after being withdrawn from the hole, and the inch wheel aids in fine adjustment of the bar to the bottom. The data connector is protected by a cover on the top side of the display unit. The display readout is instantaneous, making it manageable even for less experienced users, and results from various measurements can be easily compared with each other.

  • Type – SHAHE 5113-200 Digital Depth Gauge
  • Measuring Range – 0 to 200 mm / 0 to 8 inches
  • Resolution – 0.01 mm / 0.0005 inches
  • Accuracy – ±0.03 mm
  • Length of Gauge – 285 mm
  • Length of Base – 100 mm
  • Material – stainless steel, plastic battery cover
  • Sensor – capacitive with a glass measuring grid
  • Display – LCD, showing in mm or inches
  • Controls – ON/OFF buttons, ZERO and in/mm, locking screw, inch wheel
  • Usage – measuring depth of holes, pockets, and grooves, and height of fittings
  • Power Supply – CR2032 3V battery with a lifespan of over 1 year (not included)
  • Package Contents – digital depth gauge and plastic protective case in a cardboard box

Before first use, insert the CR2032 battery into the compartment under the rotating cover on the front of the display. Keep the seating surface of the base and the end of the measuring bar clean, free of chips and oil, to ensure the base sits flat. After use, turn off the depth gauge, wipe it dry, and return it to the case. Protect it from falls, moisture, and strong magnetic fields. When the gauge is not used for an extended period, remove the battery.

The SHAHE 5113-200 combines a larger measuring range with convenient digital readout. The stable base measuring 100 mm and the bar made of stainless steel ensure reliable measurement of depths and heights of fittings in the workshop, during maintenance, and in hobby use. Zeroing at any position and locking the bar facilitate repeated check measurements. The sturdy case protects the gauge during storage and transport.

Price incl. VAT €109.13