Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 1
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 1
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 2
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 3
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 4
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 5
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 6
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop 7

Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop

Long digital caliper with a range of 0 to 300 mm and jaws of 60 mm measures large and wide workpieces, displays values in mm or inches, and has an IP54 rating. Full description
In stock
€132.27
Safe shopping Safe shopping
Overview
Digital Calliper 300 mm with Accuracy of 0.04 mm and Jaws of 60 mm IP54 Rating Stainless Steel LCD Display Data Output For Workshop

The SHAHE digital calliper with a range of 0 to 300 mm is designed for measuring large workpieces, boards, profiles, and long components, for which shorter measuring tools are insufficient. The value is displayed on a clear LCD screen with a resolution of 0.01 mm, and you can switch between millimetres and inches with a single button. The main ruler, jaws, and depth gauge are made of stainless steel, while the electronics housing is plastic. The long outer jaws, measuring 60 mm, comfortably embrace wide and massive parts. The calliper is suitable for use in engineering, locksmithing or carpentry workshops, and in car repair shops.

The position of the sliding part is detected using a glass measuring grid, and you can set the zero point at any position within the range, allowing you to easily compare the dimensions of several pieces with each other. The measurement accuracy is ±0.04 mm, which is sufficient for a measuring tool of this length during regular dimension checks in the workshop. A metal locking screw secures the jaw in the set position, and a metal thumb wheel beneath the display allows for fine adjustments. The electronics are protected with an IP54 rating against dust and splashing water. On the top side of the body, there is a data output connector.

  • Type – SHAHE 5112-300 digital calliper
  • Measuring Range – 0 to 300 mm
  • Resolution – 0.01 mm / 0.0005 inches
  • Accuracy – ±0.04 mm
  • Units – millimetres and inches with one-button switching
  • Display – LCD
  • Rating – IP54
  • Material – stainless steel (ruler, jaws, and depth gauge), plastic housing for electronics
  • Jaw Length – outer 60 mm, inner 26 mm
  • Total Length – 390 mm
  • Measurement Methods – external and internal dimensions, depth and step
  • Power Supply – CR2032 3 V button battery
  • Equipment – metal locking screw, metal sliding wheel, and data output
  • Package Contents – digital calliper 0 to 300 mm, plastic case, and box

After use, wipe the calliper with a dry or slightly damp cloth and store it in the case, which protects it from drops, impacts, and dust. The battery is changed under the plastic cover on the front of the body. Before measuring, clean the contact surfaces of the jaws and reset the display with the jaws closed. When storing for an extended period, turn off the calliper and keep it in a dry environment.

The 300 mm calliper is a practical choice wherever larger materials are handled, and a standard caliper is no longer sufficient. The stainless steel jaws, readable display, and unit switching facilitate quick dimension checks directly at the machine or on the workbench. Thanks to its resistance to dust and splashing water, it is also suitable for dusty workshops. With a total length of 390 mm, it conveniently fits into the included case. It will be appreciated by machinists, locksmiths, carpenters, and experienced DIY enthusiasts.

Price incl. VAT €132.27