Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts 1
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts 1
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts 2
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts 3
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts 4

Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts

Large digital calliper with a range of 300 mm for wide workpieces and profiles. Zeroing, switching between mm and inches, depth gauge, and plastic case. Full description
In stock
€218.30
Safe shopping Safe shopping
Overview
Digital Calliper 1108 0–300 mm Long Jaws 60 mm Resolution 0.01 mm Stainless Steel LCD Display mm and Inches Case for Large Parts

The Digital Calliper Series 1108 with a range of 0–300 mm is designed for measuring large workpieces, wide boards, pipes, and profiles that smaller measuring tools cannot handle. The long jaws measuring 60 mm can encompass larger parts and allow measurements further from their edge. The result is displayed on an LCD screen with a resolution of 0.01 mm, making readings quick even when working with a large length of the beam. The calliper can measure external dimensions, internal diameters, and depth using the retractable depth gauge. It is useful in metalworking, carpentry, construction workshops, and in the garage during repairs.

The electronics with a green casing have three buttons. ON/OFF turns the calliper on and off, ZERO sets the zero at any position, and the in/mm button switches the display between millimetres and inches. Thanks to the zeroing in the middle of the range, you can easily determine the difference between two parts or the material loss after machining. The beam has both millimetre and inch scales marked. The slider is moved using a thumb wheel, and the locking screw holds it in place when you need to transfer the set dimension or check multiple pieces of the same size.

  • Model – 1108-300C
  • Measuring Range – 0–300 mm (0–12 inches)
  • Resolution – 0.01 mm
  • Total Length – 400 mm
  • Length of External Jaws – 60 mm
  • Material – stainless steel
  • Display – LCD with ON/OFF, ZERO, and in/mm buttons
  • Measurement Methods – external dimension, internal dimension, and depth
  • Slider Control – thumb wheel and locking screw
  • Battery – not included
  • Package Contents – digital calliper and plastic case

Due to its greater length, always store the calliper in its case to prevent the beam from bending and the measuring surfaces from scratching. Before measuring, wipe the jaws and verify zero after they are clamped. The electronics are not waterproof, so keep them away from water, coolant, and other liquids. If you will not be using the calliper for an extended period, remove the battery. When measuring long parts, hold the beam with both hands and apply the jaws perpendicular to the measured surface to avoid distortion from tilting. Do not use the calliper as a marking needle or lever, as this could damage the jaws.

The calliper with a range of 300 mm complements the workshop where larger parts are handled and where smaller measuring tools are insufficient. The beam and jaws made of stainless steel are rigid and resistant to corrosion. The clear display, zeroing, and unit switching facilitate dimension checks during manufacturing and repairs. The total length of 400 mm and long jaws allow for measuring wide workpieces in a single application. The plastic case protects the calliper during storage and transport between workplaces. It is suitable for locksmiths, carpenters, fitters, and DIY enthusiasts who want a single measuring tool for larger tasks.

Price incl. VAT €218.30