Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 1
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 1
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 2
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 3
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 4
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 5
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 6
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop 7

Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop

Caliper up to 300 mm for large workpieces with jaws 64 mm and a display that spans the entire width of the slider. It resists dust and oil and measures in mm and inches. Full description
In stock
€140.13
Safe shopping Safe shopping
Overview
Digital Calliper 0–300 mm with Large LCD Display All-Metal Design IP54 Rating Resolution 0.01 mm Stainless Steel Silver For Workshop

The digital calliper with a range of 0–300 mm is designed for measuring large workpieces, plates, profiles, and tubes in the workshop, in engineering, and during construction and DIY tasks. The measured value is displayed on a large LCD screen that occupies the entire front surface of the slider, allowing you to read the value quickly even in poor lighting conditions. The resolution of 0.01 mm enables precise readings even for long dimensions, and with one button, you can switch between millimetres and inches. The ZERO button allows you to reset the reading at any jaw position, making it easy to measure the difference between two dimensions. The overall length of the caliper is 390 mm.

The body of the caliper is made of stainless steel with a thickness of 3.5 mm and the display cover is made of zinc alloy, making the entire caliper sturdy and resistant to wear. The IP54 rating protects the electronics from dust, splashing water, and oil, so the caliper can handle dusty or oily workshop conditions. The slider moves smoothly along the caliper, and the wheel under the display allows for fine adjustments of the jaw position with one thumb. The outer jaws are 64 mm long and the inner jaws are 29 mm long, allowing you to measure both external and internal dimensions of components. The solid glass measuring grid and chamfered edges of the jaws contribute to stable and reliable readings. The buttons are located directly next to the display, so you can turn the caliper on, reset it, and switch units with one hand while holding the measured part with the other.

  • Measuring Range – 0–300 mm
  • Resolution – 0.01 mm
  • Units – millimetres and inches
  • Display – large LCD spanning the entire width of the slider
  • Controls – ON/OFF, ZERO, and mm/in buttons
  • Caliper Material – stainless steel with a thickness of 3.5 mm
  • Display Cover – zinc alloy
  • Rating – IP54
  • Overall Length – 390 mm
  • Caliper Width – 16 mm
  • Length of Outer Jaws – 64 mm
  • Length of Inner Jaws – 29 mm
  • Power Supply – 3 V button battery, not included
  • Package Contents – digital calliper 0–300 mm, storage case, cleaning cloth, battery cover opening tool, and production control protocol

You can easily replace the battery using the included tool, which allows you to open the battery compartment cover without damaging your fingers. After use, wipe the caliper with the cleaning cloth, turn it off with the ON/OFF button, and store it in the case to keep the measuring surfaces of the jaws clean and undamaged. Do not store the caliper in places with large temperature fluctuations and do not use the jaws as a scribing needle or lever to maintain their parallelism.

The digital calliper up to 300 mm covers dimensions that ordinary measuring tools cannot manage. The jaws, 64 mm long, reach deep and facilitate measuring wide parts and flanges. The large display with clear digits speeds up the reading of measured values. The all-metal construction with an IP54 rating is suitable for dusty or oily workshop conditions. The storage case included protects the caliper during transport and between individual jobs.

Price incl. VAT €140.13