Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service 1
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service 1
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service 2
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service 3

Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service

Stainless steel caliper with 80 mm deep jaws for measuring the thickness of large brake discs. Accurate reading on the Nonius with a resolution of 0.1 mm. Full description
In stock
€75.07
Safe shopping Safe shopping
Overview
Brake Disc Caliper 0–60 mm with Long Jaws 80 mm Nonius 0.1 mm Stainless Steel For Large Discs and Car Service

The caliper with long jaws is designed for measuring the thickness of brake discs, where the short jaws of a standard caliper cannot reach the friction surface. The jaw depth of 80 mm allows measurement further from the edge of the disc, which is particularly appreciated for larger discs. The measuring range of 0 to 60 mm is sufficient for the thickness of standard brake discs. The value is read on the Nonius with a resolution of 0.1 mm. The caliper is mechanical and does not require any batteries for operation.

The arm, slider, and both jaws are made of stainless steel, which is easy to keep clean in the workshop. The scale is marked directly on the arm, and the slider carries the Nonius for reading tenths of a millimetre. The locking screw on the slider holds the measured position, allowing you to remove the caliper from the disc and read the value comfortably in the light. The ends of the jaws are tapered to points that rest on the friction surface outside the raised edge of the worn disc.

  • Type – mechanical caliper with Nonius for brake discs
  • Measuring range – 0 to 60 mm
  • Jaw depth – 80 mm
  • Nonius resolution – 0.1 mm
  • Material – stainless steel
  • Jaw tips – tapered for measuring outside the edge of the disc
  • Locking – screw on the slider for securing position
  • Contents – 1 brake disc caliper with 80 mm jaws

Before measuring, clean the disc of brake dust, dirt, and rust. Insert the jaws from both sides so that the tips rest on the friction surface, slide the slider all the way to the stop, and secure it with the screw. Compare the value from the main scale and Nonius with the minimum thickness, which can be found stamped on the disc or in the vehicle's service data. Measure at multiple points around the circumference to detect any uneven wear. It is advisable to measure both discs on the same axle and record the results, so during the next inspection, you can easily see how quickly the discs are wearing and when they will need to be replaced along with the pads. After use, wipe the caliper with a clean cloth and store it in a dry place.

The long jaws with a depth of 80 mm make this caliper a suitable assistant for workshops that work with larger discs and do not want to disassemble anything else for measurement. The mechanical reading on the Nonius with a range of 0 to 60 mm operates without batteries and electronics. The stainless steel construction is easy to clean, and the scale remains readable for a long time. This caliper is useful for car mechanics, tyre services, and vehicle owners who monitor their brake condition themselves. It finds a place in the service trolley, tool box, and workbench drawer, and is quickly at hand during every tyre or pad change.

Price incl. VAT €75.07