Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Gardening Supplies Other Gardening Supplies B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 1
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 1
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 2
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 3
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 4
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 5
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables 6

B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables

Adjustable angle joint for strong 20 mm garden poles connects two poles at the top of the support at any angle. Suitable for pole tomatoes, cucumbers, squashes, and beans. Full description
In stock
€37.95
Safe shopping Safe shopping
Overview
B Holder for 20 mm Garden Poles 10 pcs Adjustable Angle Joint for Two Strong Poles Black Plastic For High Support of Vegetables

The B Holder connects two strong garden poles at a single point, and with the rotating joint between them, you can set the required angle. The clamps have an internal diameter of 20 mm and are designed for the strongest poles, which create high and sturdy supports for vegetables. Most commonly, it holds the peak of an A-shaped support, where it connects two slanted legs. The joint is made from black plastic and can be fitted without tools. The package contains 10 pieces, sufficient for a longer support in a bed or greenhouse.

Both clamps are connected by a rotating joint, allowing you to open the support legs narrowly or widely depending on the width of the bed. There are small loops on the sides of the clamps. The holder does not have an upper clamp for a crossbar, so it serves to connect two poles at the top of the support or at the point where the structure bends at an angle. Strong poles with a diameter of 20 mm are suitable for taller and heavier plants, such as pole tomatoes, salad cucumbers, squashes, or climbing beans. With a high support, the fruits remain above the ground, making them easy to reach during harvest, and there is enough space between the individual canopies for watering and weeding.

  • Type – adjustable angle joint for two poles
  • Pole Diameter – 20 mm
  • Construction – two clamps connected by a rotating joint, with loops on the sides
  • Material – plastic
  • Colour – black
  • Usage – tops of high canopy supports and angled joints for tomatoes, cucumbers, squashes, and beans
  • Package Contents – 10 pcs of B holders, poles are not included

Before assembly, plan how many pairs of poles you need for the bed and measure their spacing. Insert the ends of two poles into the clamps of each holder, rotate the joint to the desired angle, and drive the lower ends of the poles deep enough into the ground. Follow the same procedure for the other pairs to ensure the support maintains the same height along the entire length of the bed. During growth, loosely tie the plants to the poles with soft twine or tape to prevent them from bending or breaking under the weight of the fruits. At the end of the season, disassemble the structure, rinse the holders with water, let them dry, and store them along with the poles in a dry place.

The set of 10 B holders for 20 mm garden poles makes it easier to construct a sturdy canopy support without wire and complicated tying at the top. Each holder connects two strong poles, and you can adjust the angle between them simply by rotating the joint. This way, you can adapt the support to the width of the bed and the height of the plants being grown. The joints made from plastic can be fitted by hand and are reusable in subsequent seasons. They are suitable for vegetable gardens, raised beds, and greenhouses.

Price incl. VAT €37.95