Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Gardening Supplies Other Gardening Supplies B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 1
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 1
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 2
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 3
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 4
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 5
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy 6

B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy

Joint connector with a rotating joint for 16 mm garden poles. Connects two poles at the top of the support at a chosen angle, suitable for tomatoes, cucumbers, and climbing beans. Full description
In stock
€32.27
Safe shopping Safe shopping
Overview
B Holder for 16 mm Garden Poles 10 pcs Joint Connector for Two Poles with Adjustable Angle Black Plastic For Tomato and Cucumber Canopy

The B holder connects two garden poles at a single point, and thanks to the joint between them, you can set any angle. The clamps are designed for poles with a diameter of 16 mm, which are sturdy enough for taller vegetables such as tomatoes, cucumbers, or climbing beans. The holder is most commonly used at the top of an A-shaped canopy support, where it connects two slanted legs. The connector is made of black plastic and can be fitted without tools. The package contains 10 pieces, which is sufficient for supporting an entire bed. It also works well for decorative climbing plants.

Both clamps of the holder are connected by a rotating joint, which allows you to adjust the spread of the poles according to the width of the bed. There are small loops on the sides of the clamps. The holder does not have a top clamp for a crossbar, so it is a pure connector for two poles, with which you can construct a canopy, slanted support, or an angled frame. Poles with a diameter of 16 mm are suitable for medium-height structures in outdoor beds, raised beds, and greenhouses. Plants can climb on both sides of the support, and the fruits will remain easily accessible for harvesting. There will be enough space between individual canopies for watering and weeding.

  • Type – joint connector for two poles with adjustable angle
  • Pole Diameter – 16 mm
  • Construction – pair of clamps with a rotating joint and side loops
  • Material – plastic
  • Colour – black
  • Usage – tops of canopy supports and slanted joints for tomatoes, cucumbers, beans, and peas
  • Package Contents – 10 pcs of B holders, poles are not included

When constructing, insert the ends of two poles into the clamps and rotate the joint so that the legs of the support have the desired spread. Push the lower ends of the poles into the ground and space the next pair at regular intervals along the bed. Before construction, measure the length of the bed and plan the number of pairs of poles accordingly to ensure even support along the entire length. Choose the distance between pairs according to the length of the poles and the type of plants being grown. During growth, loosely tie the plant shoots to the poles to prevent bending under the weight of the fruits. In autumn, disassemble the support, wash the holders with water, let them dry, and store them with the poles in a dry place for the next season.

The package of 10 B holders for 16 mm garden poles is a simple solution for constructing a canopy support in a vegetable garden. Each connector firmly links two poles at the top, and the angle between them can be adjusted by rotating the joint. This allows you to adapt the shape of the support to the width of the bed and the type of plants being grown. The black parts made of plastic are unobtrusive among the leaves. The holders are reusable and can be easily disassembled and stored after harvesting. Even novice gardeners can manage the assembly in no time.

Price incl. VAT €32.27