Home page Home page Hobbies & Garden Gardening Supplies Irrigation 8-in-1 USB Soil Sensor for Android Measuring Moisture Temperature pH EC and NPK Probe with 4 Stainless Steel Probes IP68 Soil Tester for Farm
8-in-1 USB Soil Sensor for Android Measuring Moisture Temperature pH EC and NPK Probe with 4 Stainless Steel Probes IP68 Soil Tester for Farm

8-in-1 USB Soil Sensor for Android Measuring Moisture Temperature pH EC and NPK Probe with 4 Stainless Steel Probes IP68 Soil Tester for Farm

Measure moisture, temperature, pH, conductivity, salinity, and nitrogen, phosphorus, and potassium content in the soil. Values are displayed in the app on your Android phone. Full description
In stock
€136.64
Safe shopping Safe shopping
Overview
8-in-1 USB Soil Sensor for Android Measuring Moisture Temperature pH EC and NPK Probe with 4 Stainless Steel Probes IP68 Soil Tester for Farm and Greenhouse

The 8-in-1 soil sensor helps you quickly assess the condition of the soil without sending samples to a laboratory. Once the probe is inserted into the ground, it measures 8 soil parameters simultaneously – temperature, moisture, electrical conductivity, pH, salinity, and nitrogen, phosphorus, and potassium content. The sensor connects via USB cable directly to a mobile phone, which also powers it, so no batteries are required. The measured values are displayed in real-time in the app for Android and HarmonyOS. It is suitable for use in gardens, fields, greenhouses, and for growing vegetables and flowers.

The probe features four tips made of 316L stainless steel, which resist corrosion, electrolysis, and saline and alkaline soils. The sensor body is encased in black self-extinguishing epoxy resin, preventing moisture ingress. With an IP68 rating, you can insert the sensor directly into the soil or bury it in an excavated hole and monitor values at a single depth for an extended period. The app can save and export the measured data, allowing you to keep track of how the soil changes throughout the season.

  • Type – 8-in-1 soil sensor with USB connection to the phone
  • Measured parameters – temperature, moisture, electrical conductivity EC, pH, salinity, nitrogen, phosphorus, and potassium
  • Soil moisture – range 0–100 % with a resolution of 0.1 %
  • Soil temperature – range -40 to 80 °C with a resolution of 0.1 °C
  • Conductivity EC – range 0–20000 µS/cm
  • Nitrogen phosphorus and potassium – range 0–1999 mg/kg with a resolution of 1 mg/kg
  • Salinity – range 0–20000 mg/l
  • Power supply – 5 V from the connected phone, power consumption 0.5 W
  • Operating temperature – -20 to 60 °C
  • Stabilisation time – up to 5 minutes
  • Material – tips made of 316L stainless steel and body encased in epoxy resin
  • Ingress protection – IP68
  • Body dimensions – 128 x 46 x 16 mm
  • Tip length – 56 mm
  • Cable length – 2.35 m
  • Compatibility – phones with Android and HarmonyOS (not compatible with iOS)
  • Package contents – soil sensor with a fixed cable ending in a USB-A connector and an adapter from USB-A to USB-C for connecting to a phone

Before measuring, remove stones and larger clumps from the area and insert the sensor vertically into the soil so that the tips are submerged along their entire length. Do not wiggle the sensor side to side while it is inserted, and take readings only after stabilisation. Do not leave the sensor in direct strong sunlight and remove it from the soil during a storm. After use, clean the tips from soil and allow them to dry.

This USB soil tester is suitable for gardeners, growers, and smaller farms who want to water and fertilise according to the actual condition of the soil. The phone serves as both a display and power source, so you only need one device that you already carry in your pocket. The combination of measuring moisture and NPK nutrients in one sensor will help you identify when plants are lacking water and when fertiliser is needed. The sensor is capable of measuring in flowerbeds, greenhouses, and growing containers.

Price incl. VAT €136.64