Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Exterior Car Accessories Valve Caps 50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries 1
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries 1
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries 2
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries 3
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries 4

50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries

Short brass valve extension of 50 mm for easier pressure checking and inflation of tyres where the valve is slightly recessed into the wheel rim. Full description
In stock
€22.23
Safe shopping Safe shopping
Overview
50 mm Valve Extension for Tyres Brass Extension with Metal Cap Gold Colour for Cars and Lorries

The tyre valve extension is a practical aid wherever access to the standard valve is difficult with a compressor hose or pressure gauge. This extension has a length of 50 mm and is made of brass, giving it a characteristic golden appearance. One end screws directly onto the tyre valve, while the other end moves the filling point closer to the edge of the rim. This allows you to check or adjust the tyre pressure without unnecessary bending and searching for the right angle. The extension is suitable for both cars and lorries.

A length of 50 mm is one of the shortest designs in this range. The extension is especially useful where the valve is only slightly recessed into the rim or where a longer extension would protrude unnecessarily. The filling point is moved just a little further, but often that is enough for the pump head to be attached comfortably and effortlessly. The compact size also means that the extension appears unobtrusive on the wheel. At the free end, there is a metal cap with a knurled surface, which you can easily grip and loosen with your fingers.

The design of the extension is simple, and any driver can manage the installation. On the valve side, there is a hexagonal end with an internal thread, which you screw on like a regular cap. At the opposite end, there is an external thread onto which the pump head, compressor, or pressure gauge is attached. The brass body, measuring 50 mm, connects both ends and directs air from the filling point to the valve. The hexagon on the end also facilitates gripping during installation and removal.

  • Product Type – tyre valve extension
  • Length – 50 mm
  • Material – brass
  • Colour – gold, cap silver
  • Connection to Valve – hexagonal end with internal thread
  • Ending – external thread with attached metal cap
  • Cap – knurled surface and forked tip
  • Intended Use – cars and lorries
  • Package Contents – 1 tyre valve extension 50 mm with attached metal cap

Before installation, unscrew the original cap from the valve and screw on the extension with the hexagonal end. Tighten gently to avoid damaging the thread. The short 50 mm design can be left permanently on the wheel, or it can be attached only during pressure checks and then removed again. After inflating, do not forget to replace the cap to prevent dirt from entering the thread. The brass surface only needs to be wiped occasionally with a dry cloth.

This short extension is a simple solution for wheels where access to the valve is challenging. The length of 50 mm moves the filling point closer to the edge of the rim while not protruding. The brass body and metal cap look neat on the wheel. The extension is suitable for any garage and for drivers who check their tyre pressure themselves. It can be used for both cars and lorries.

Price incl. VAT €22.23