Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Exterior Car Accessories Valve Caps 180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 1
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 1
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 2
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 3
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 4
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries 5

180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries

The longest brass valve extension 180 mm provides access to valves deep within the rim. Convenient pressure checking and tyre inflation without unnecessary effort. Full description
In stock
€24.85
Safe shopping Safe shopping
Overview
180 mm Valve Extension for Tyres Longest Brass Extension with Metal Cap Gold Colour for Cars and Lorries

The tyre valve extension is a practical helper wherever access to a standard valve is difficult with a compressor hose or pressure gauge. This extension has a length of 180 mm and is made of brass, giving it a characteristic golden appearance. One end screws directly onto the wheel valve, and the other end moves the filling point closer to the edge of the rim. This allows you to check or adjust the tyre pressure without unnecessary bending and searching for the right angle. The extension is designed for both cars and lorries.

The length of 180 mm is the longest version in this range. The extension is intended for wheels where the valve is positioned very deeply or covered by other parts of the wheel, and a shorter extension is insufficient. The filling point is moved far from the valve due to the long body, allowing you to attach the pump and pressure gauge without complicated manoeuvring. At the free end, there is a metal cap with a knurled surface, which you can easily grip and loosen with your fingers. This design is especially appreciated by owners of larger vehicles.

The construction of the extension is simple, and any driver can manage its installation. On the valve side, there is a hexagonal end with an internal thread, which you screw on similarly to a standard cap. At the opposite end, there is an external thread for attaching the head of the pump, compressor, or pressure gauge. The brass body, measuring 180 mm, connects both ends and directs air from the filling point to the valve. The hexagon on the end also facilitates gripping during installation and removal.

  • Product Type – tyre valve extension
  • Length – 180 mm
  • Material – brass
  • Colour – gold, cap silver
  • Connection to Valve – hexagonal end with internal thread
  • End Finish – external thread with attached metal cap
  • Cap – knurled surface and forked tip
  • Intended Use – cars and lorries
  • Package Contents – 1 tyre valve extension 180 mm with attached metal cap

Before installation, unscrew the original cap from the valve and screw on the extension using the hexagonal end. Tighten gently to avoid damaging the thread. With the longest extension of 180 mm, ensure that it does not touch brake or other moving parts and that the free end is easily accessible. After inflating, replace the cap to prevent dirt from entering the thread. The brass surface only needs to be wiped occasionally with a dry cloth.

The 180 mm extension is the solution for the most inaccessible valves. Pressure checking and inflation are quick with it, even on wheels where a shorter extension would be insufficient. The brass body with the metal cap looks neat on the wheel. The extension is suitable for the equipment of a car workshop, tyre service, or drivers of larger vehicles. It can be used for both cars and lorries.

Price incl. VAT €24.85