Home page Home page Auto & Moto Exterior Car Accessories Valve Caps 140 mm Valve Extension for Tyres Long Brass Extension with Metal Cap Gold Colour For Cars and Lorries
140 mm Valve Extension for Tyres Long Brass Extension with Metal Cap Gold Colour For Cars and Lorries

140 mm Valve Extension for Tyres Long Brass Extension with Metal Cap Gold Colour For Cars and Lorries

Long brass valve extension 140 mm for wheels with deeply seated valves. Pressure checking and inflation without complicated angle adjustments. Full description
In stock
€23.97
Safe shopping Safe shopping
Overview
140 mm Valve Extension for Tyres Long Brass Extension with Metal Cap Gold Colour For Cars and Lorries

The valve extension for tyres is a practical tool wherever access to a standard valve is difficult with a compressor hose or pressure gauge. This extension is 140 mm long and made of brass, giving it a characteristic golden appearance. One end screws directly onto the wheel valve, while the other end moves the filling point closer to the edge of the rim. This allows you to check or adjust the tyre pressure without unnecessary bending or searching for the correct angle. The extension is suitable for both cars and lorries.

A length of 140 mm is among the longer options in this range. It is ideal for wheels where the valve is deeply seated in the rim or where access is complicated by other parts of the wheel. The long body moves the filling point far away from the valve, allowing you to easily attach the pump or pressure gauge. At the free end is a metal cap with a knurled surface, which you can easily grip and loosen with your fingers. The longer extension is especially appreciated by those who regularly check tyre pressure.

The design of the extension is simple, and any driver can install it. On the valve side, there is a hexagonal end with an internal thread, which you screw on similarly to a regular cap. At the opposite end is an external thread, onto which the pump head, compressor, or pressure gauge is attached. The brass body, measuring 140 mm, connects both ends and directs air from the filling point to the valve. The hexagon on the end also facilitates gripping during installation and removal.

  • Product Type – valve extension for tyres
  • Length – 140 mm
  • Material – brass
  • Colour – gold, cap silver
  • Connection to Valve – hexagonal end with internal thread
  • Termination – external thread with attached metal cap
  • Cap – knurled surface and forked tip
  • Intended Use – cars and lorries
  • Package Contents – 1 valve extension 140 mm with attached metal cap

Before installation, unscrew the original cap from the valve and screw on the extension with the hexagonal end. Tighten carefully to avoid damaging the thread. With the longer extension of 140 mm, ensure it does not touch the brake or other moving parts. After inflating, replace the cap to prevent dirt from entering the thread. The brass surface only needs to be wiped occasionally with a dry cloth.

The long extension of 140 mm provides access to valves that are usually difficult to reach. Pressure checking and inflation are quicker and more convenient with it. The brass body with the metal cap looks neat on the wheel. The extension is suitable for the equipment of a garage, tyre service, or a driver who maintains their own wheels. It is useful for both cars and lorries.

Price incl. VAT €23.97