Home page Home page Hobbies & Garden Tools Saws & Accessories Hand and folding saws Japanese Ryoba Double-Edged Pull Saw 570 mm Blade 250 mm 6–10 and 18 TPI SK5 Steel Replaceable Flexible Blade Wood Saw for Joiners
Japanese Ryoba Double-Edged Pull Saw 570 mm Blade 250 mm 6–10 and 18 TPI SK5 Steel Replaceable Flexible Blade Wood Saw for Joiners

Japanese Ryoba Double-Edged Pull Saw 570 mm Blade 250 mm 6–10 and 18 TPI SK5 Steel Replaceable Flexible Blade Wood Saw for Joiners

Double-edged saw with coarse teeth for rip cuts and fine teeth for cross-cuts. Sharp teeth, flexible blade and quick tool-free blade replacement in the workshop. Full description
In stock
€45.37
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Japanese Ryoba Double-Edged Pull Saw 570 mm Blade 250 mm 6–10 and 18 TPI SK5 Steel Replaceable Flexible Blade Wood Saw for Joiners

The Japanese Ryoba-style pull saw combines two different tooth patterns in one tool, so you do not need to switch between two saws when working with wood. One side of the blade has coarser teeth with a pitch of 6–10 TPI for fast rip cuts along the grain, while the other side has fine teeth with a density of 18 TPI for clean cross-cuts across the grain. The 250 mm blade is made from SK5 steel and the saw has an overall length of 570 mm. The saw cuts on the pull stroke, so the thin blade does not buckle during use and the cut remains narrow and precise. It is suitable for joiners, model-makers and DIY enthusiasts who want straight, clean cuts without much effort.

The teeth are triple-ground, with three sharp edges on each tooth, which speeds up cutting and reduces splintering on the surface of the wood. The thin flexible blade can bend and lie flat against the surface when trimming tenons or dowels, allowing you to cut off the protruding part close to the surface without damaging the surrounding material. The blade is attached to the handle with a pivoting screw, so you can replace it in moments without tools – simply loosen the screw, slide out the blade and fit a new one. The handle has a non-slip surface that is comfortable to hold, even during extended use.

  • Type – Japanese Ryoba pull saw with double-sided teeth
  • Blade length – 250 mm
  • Overall length – 570 mm
  • Teeth for rip cuts – 6–10 TPI
  • Teeth for cross-cuts – 18 TPI
  • Blade material – SK5 steel
  • Teeth – triple-ground
  • Blade – flexible and replaceable without tools
  • Handle – non-slip
  • Use – cutting wood, trimming tenons and dowels, joinery and model-making
  • Package contents – 1 hand saw with blade fitted

When cutting, guide the saw with a light pull towards you and let the teeth do the work without applying much pressure; pushing forwards could bend the thin blade. Use the coarse side for cuts along the grain and the fine side for cross-cuts and finishing work. After use, clean sawdust and resin from the blade, dry it and store it so that the teeth do not touch other metal tools. If the teeth become blunt over time, simply replace the blade and continue using the handle.

This double-edged Japanese saw is a practical tool for any workshop where wood is worked. Its two tooth patterns handle both rip cuts and cross-cuts with a single tool, while the thin blade made from SK5 steel leaves a narrow kerf with smooth edges. The overall length of 570 mm ensures comfortable guidance of the cut, even when working with wider boards and beams. Quick tool-free blade replacement saves time and extends the service life of the entire saw. It will appeal to both beginner DIY enthusiasts and experienced joiners who want precise joints and clean cuts.

Price incl. VAT €45.37