Home page Home page Hobbies & Garden Pumps Fountain and pond pumps

Fountain and pond pumps

A jet in a bird bath, a stream beside a garden pond or a trickling tabletop fountain on the patio all need a small pump that keeps the water circulating. Fountain and pond pumps include mains-powered submersible models with a set of nozzles, more powerful filter pumps for ponds and waterfalls, and solar fountains with a separate panel or in a floating design, which work without a mains connection. The choice depends mainly on flow, head and whether there is a socket near the water.

0 products
This category contains no products.

We are working hard to populate it. In the meantime, you can browse other categories.

Continue shopping

Fountain and pond pumps

In the garden or on a balcony, the pump draws water from the pond, a container or a bowl and pushes it up through a nozzle, over stones or into a filter. Fountain and pond pumps differ mainly in their power source and output, from models of just a few watts for a bird bath to powerful pumps for waterfalls and fish ponds.

Mains-powered submersible pumps sit on the bottom of the container, and the surrounding water also keeps them cool. Small models of 3 to 15 W are enough for a tabletop fountain, a bird bath or a smaller fountain, their flow is set with a regulator and the shape of the jet depends on the fitted nozzle, such as a bell, tulip or tiered jet. Stronger pumps with a flow of several thousand litres an hour drive waterfalls, streams and pond filters and often have a pre-filter or intake cage that catches leaves and coarse debris.

The quoted flow applies at zero head, in other words when the water does not have to rise at all. As height and hose length increase, the flow drops, so the maximum head should be well above the point the water needs to reach, whether that is the top of the jet or the upper edge of the waterfall. For pond filtration, the pump is chosen according to the water volume so that it circulates the whole volume at least once every two hours.

Solar fountains need no cable to a socket, because the pump is driven by a photovoltaic panel. The panel either stands separately on a ground stake or stand, or forms the top of a floating fountain that you simply place on the water. Fountains without a battery only run in direct sunshine and weaken or stop when it clouds over, while models with a battery and LED lights keep going in the evening. Kits with a larger panel and a brushless 12 V pump can even power a small waterfall or stream.

The pump must never run dry, so keep an eye on the water level, especially in small bowls where the water evaporates quickly. Rinse the pre-filter and nozzles regularly, and before winter take the pump out of the water and store it somewhere frost-free. Connect mains-powered pumps near a pond only through an RCD and an outdoor socket with a splash-proof cover. Always unplug the pump before cleaning it or doing anything in the water.