LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Sports & Outdoor Electric bikes Off-road e-bikes Conversion Kit for Electric Bicycle Rear Hub Motor MXUS XF08 36 V 250 W Wheel 28" 700C Brake Sensor Freewheel 6–7 Speeds LCD Display
Conversion Kit for Electric Bicycle Rear Hub Motor MXUS XF08 36 V 250 W Wheel 28" 700C Brake Sensor Freewheel 6–7 Speeds LCD Display

Conversion Kit for Electric Bicycle Rear Hub Motor MXUS XF08 36 V 250 W Wheel 28" 700C Brake Sensor Freewheel 6–7 Speeds LCD Display

Rear hub motor 36 V 250 W laced into a 28" (700C) wheel, speed around 30 km/h, LCD display, throttle, PAS sensor, and brake sensor in one kit. Full description
In stock
Delivery €1.59
30-day return policy
€386.86
Safe shopping Safe shopping
Overview
Conversion Kit for Electric Bicycle Rear Hub Motor MXUS XF08 36 V 250 W Wheel 28" 700C Brake Sensor Freewheel 6–7 Speeds LCD Display

The kit for converting a traditional bicycle into an electric bicycle includes a rear wheel 28" (700C) with a built-in MXUS XF08 36 V 250 W motor, an LCD display, a brake sensor, and other components needed for installation. The motor is located in the rear hub and is designed for bikes with a screw-on freewheel with 6–7 speeds, not for a cassette. According to the manufacturer, the 28" wheel achieves speeds of approximately 30 km/h while riding. The rear wheel is suitable for frames with a rear dropout spacing of 13.3–13.9 cm. The rim and motor body are in black finish.

Main Features

  • Rear Hub Motor – model XF08 with a rated voltage of 36 V and a rated power of 250 W is located directly in the hub and drives the rear wheel.
  • Wheel Size – rear wheel 28" (700C) with spokes and rim, into which the motor is laced, so the wheel is ready for mounting in the frame.
  • Speed – the manufacturer states that the 28" wheel can reach speeds of approximately 30 km/h while riding.
  • Gears – the motor is intended for a screw-on freewheel with 6 to 7 speeds; a cassette does not fit this hub.
  • Frame Compatibility – the wheel is suitable for frames with a rear dropout spacing of 13.3–13.9 cm, and the hub's mounting width is 13.6 cm.
  • Display – the LCD display with buttons is mounted on the handlebars and shows riding data.
  • Brake Sensor – when the brake is pressed, it sends a signal to the controller and interrupts the motor operation, so the drive does not oppose braking.
  • Control – the throttle lever allows riding with motor assistance without the need to pedal.
  • Controller – connects the motor to the display, pedal assist sensor, throttle, brake sensor, and light.
  • Pedal Assist Sensor – the PAS sensor detects pedalling and activates motor support while riding.
  • Lighting – the kit includes a front light that connects to the bicycle's electrical system.
  • Cabling – the cable harness and extension cable serve to connect all components of the kit.
  • Finish – the rim features red elements and the motor body is black, while the spokes are silver.

Package Contents:

  • 1x rear wheel 28" (700C) with MXUS XF08 36 V 250 W motor
  • 1x LCD display
  • 1x brake sensor kit
  • 1x controller
  • 1x PAS sensor
  • 1x throttle lever
  • 1x front light
  • 1x cable harness
  • 1x extension cable

This kit is designed for converting a bicycle into an electric bicycle with a rear hub motor rated at 250 W and a voltage of 36 V. The rear wheel 28" (700C) is suitable for frames with dropout spacing of 13.3–13.9 cm and for a screw-on freewheel with 6–7 speeds. While riding, it can reach speeds of approximately 30 km/h. The LCD display shows riding data, and the brake sensor turns off the motor when braking. The throttle lever, PAS sensor, and front light complete the kit's equipment.

Delivery and Returns
Price incl. VAT €386.86