LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Sports & Outdoor Electric bikes Off-road e-bikes Conversion Kit for Electric Bicycle Front Hub Motor XF07 36 V 250 W 26" Wheel Brake Sensor Fork Spacing 9.7–10.3 cm LCD Display Black
Conversion Kit for Electric Bicycle Front Hub Motor XF07 36 V 250 W 26" Wheel Brake Sensor Fork Spacing 9.7–10.3 cm LCD Display Black

Conversion Kit for Electric Bicycle Front Hub Motor XF07 36 V 250 W 26" Wheel Brake Sensor Fork Spacing 9.7–10.3 cm LCD Display Black

Front hub motor 36 V 250 W laced into a 26" wheel, speed around 28 km/h, LCD display, throttle, PAS sensor, light and brake sensor in one kit. Full description
In stock
Delivery €1.59
30-day return policy
€374.63
Safe shopping Safe shopping
Overview
Conversion Kit for Electric Bicycle Front Hub Motor XF07 36 V 250 W 26" Wheel Brake Sensor Fork Spacing 9.7–10.3 cm LCD Display Black

This kit for converting a traditional bicycle into an electric bicycle includes a 26" front wheel with a built-in XF07 36 V 250 W motor, LCD display, brake sensor, and other components needed for installation. The motor is located in the front hub and is mounted in the front fork instead of the original wheel. The wheel is suitable for forks with a dropout spacing of 9.7–10.3 cm. According to the manufacturer, the 26" wheel reaches a speed of approximately 28 km/h while riding. The rim and motor body are in black finish.

Main Features

  • Motor in Front Hub – model XF07 with a nominal voltage of 36 V and a nominal power of 250 W is located directly in the hub and drives the front wheel.
  • Wheel Size – 26" front wheel with a rim into which the motor is laced, making it ready for installation in the fork.
  • Speed – the manufacturer states that the 26" wheel achieves a speed of approximately 28 km/h.
  • Fork Compatibility – the wheel is suitable for forks with a front dropout spacing of 9.7–10.3 cm, the hub installation width is 10 cm.
  • Rear Drive Unchanged – the motor is at the front, so the gears and rear wheel remain original.
  • Display – the LCD display with buttons is mounted on the handlebars and shows riding data.
  • Brake Sensor – when the brake is pressed, it sends a signal to the controller and interrupts the motor operation, preventing the drive from opposing braking.
  • Control – the throttle lever allows riding with motor assistance without pedalling.
  • Controller – connects the motor with the display, pedal assist sensor, throttle, brake sensor, and light.
  • Pedal Assist Sensor – the PAS sensor detects pedalling and activates motor support while riding.
  • Lighting – the kit includes a front light that connects to the bicycle's electrical equipment.
  • Cabling – the cable harness and extension cable are used to connect all components of the kit.
  • Finish – the rim and motor body are black, the spokes are silver.

Package Contents:

  • 1x 26" front wheel with XF07 36 V 250 W motor
  • 1x LCD display
  • 1x brake sensor kit
  • 1x controller
  • 1x PAS sensor
  • 1x throttle lever
  • 1x front light
  • 1x cable harness
  • 1x extension cable

This kit is designed for converting a bicycle into an electric bicycle with a front hub motor rated at 250 W and a voltage of 36 V. The 26" front wheel is suitable for forks with dropout spacing of 9.7–10.3 cm and the rear drive remains unchanged. While riding, it reaches a speed of approximately 28 km/h. The LCD display shows riding data and the brake sensor cuts off the motor when braking. The throttle lever, PAS sensor, and front light complete the kit's equipment.

Delivery and Returns
Price incl. VAT €374.63