LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Sports & Outdoor Electric bikes Off-road e-bikes Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring Bottom Bracket 68–73 mm VD618 Colour Display Black
Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring Bottom Bracket 68–73 mm VD618 Colour Display Black

Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring Bottom Bracket 68–73 mm VD618 Colour Display Black

48 V 750 W mid motor conversion kit for bicycles, 44T chainring, bottom bracket 68–73 mm, VD618 colour display, throttle, cranks and brake levers included in the kit. Full description
In stock
Delivery €1.59
30-day return policy
€767.21
Safe shopping Safe shopping
Overview
Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring Bottom Bracket 68–73 mm VD618 Colour Display Black

This kit converts a traditional bicycle into an electric bike and includes a mid motor Bafang 48 V 750 W, 44T chainring, VD618 colour display, brake levers, and other necessary components for installation. The motor is mounted in the bottom bracket area and is designed for frames with a bottom bracket width of 68–73 mm. It drives the bicycle via the chain, allowing the use of existing gears on the rear wheel. The kit also includes cranks, a thumb throttle, a speed sensor, a front light, and installation tools. The motor body is finished in black.

Main Features

  • Mid Motor – Bafang motor with a nominal voltage of 48 V and a power output of 750 W is secured in the bottom bracket of the frame and drives the bicycle via the chain.
  • Bottom Bracket – the kit is designed for frames with a bottom bracket width of 68–73 mm, it is advisable to measure this dimension on the bicycle before purchase.
  • Chainring – 44T chainring with a protective cover is mounted directly onto the motor and replaces the original chainring on the cranks.
  • Cranks – a pair of cranks is attached to the motor axle and replaces the original cranks of the bicycle.
  • Display – VD618 colour display with buttons is mounted on the handlebars and shows speed, power, battery status, daily and total kilometres, and assistance level.
  • Brake Levers – pressing the brake interrupts the motor's operation, so the drive does not counteract braking.
  • Control – the thumb throttle allows riding with motor assistance without pedalling.
  • Speed Sensor – the sensor with a magnet transmits information about the bicycle's speed to the system and display.
  • Lighting – the kit includes a front light that connects to the bicycle's electrical system.
  • Cabling – the 1T4 cable harness connects the motor with the display, throttle, brake levers, and light.
  • Tools – the package includes a BBS key, crank puller, and tool for removing the bottom bracket, enabling the removal of the original bottom bracket assembly.
  • Installation – the kit contains mounting screws, cable ties for securing cables, and a user manual.
  • Finish – both the motor body and chainring with cover are black.

Package Contents:

  • 1x Bafang 48 V 750 W mid motor
  • 1x VD618 colour display
  • 2x brake lever
  • 1x 44T chainring with cover
  • 2x crank
  • 1x thumb throttle
  • 1x speed sensor
  • 1x 1T4 cable harness
  • 1x front light
  • 1x set of mounting screws
  • 1x BBS key
  • 1x crank puller
  • 1x tool for removing the bottom bracket
  • 1x set of cable ties
  • 1x sticker
  • 1x user manual

This kit is designed for converting a bicycle into an electric bike with a mid motor rated at 750 W and a voltage of 48 V. The motor is installed in frames with a bottom bracket width of 68–73 mm, and the chain drive retains the original gearing of the bicycle. The 44T chainring, cranks, and necessary tools are included in the package. VD618 colour display shows riding data, and brake levers cut off the motor during braking. The thumb throttle, speed sensor, and front light complete the kit's equipment.

Delivery and Returns
Price incl. VAT €767.21