LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Sports & Outdoor Electric bikes Off-road e-bikes Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring 100 mm Bottom Bracket VD618 Colour Display Black
Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring 100 mm Bottom Bracket VD618 Colour Display Black

Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring 100 mm Bottom Bracket VD618 Colour Display Black

48 V 750 W mid motor for bicycle conversion, 44T chainring, 100 mm bottom bracket, VD618 colour display, throttle, cranks and brake sensor included in the kit. Full description
In stock
Delivery €1.59
30-day return policy
€767.21
Safe shopping Safe shopping
Overview
Bafang 48 V 750 W Mid Motor Conversion Kit 44T Chainring 100 mm Bottom Bracket VD618 Colour Display Black

This kit converts a traditional bicycle into an electric bike and includes a mid motor Bafang 48 V 750 W, 44T chainring, VD618 colour display, brake sensor and other necessary components for installation. The motor mounts in the bottom bracket area and is designed for frames with a 100 mm bottom bracket. It drives the bike via the chain, allowing the existing gears on the rear wheel to be retained. The kit also includes cranks, a thumb throttle, a speed sensor, a front light and installation tools. The motor body is finished in black.

Main Features

  • Mid Motor – Bafang motor with a nominal voltage of 48 V and a power output of 750 W mounts in the frame's bottom bracket and drives the bike via the chain.
  • Bottom Bracket – the kit is intended for frames with a bottom bracket width of 100 mm, it is advisable to measure this dimension on the bike before purchase.
  • Chainring – 44T chainring with a protective cover mounts directly onto the motor and replaces the original chainring on the cranks.
  • Cranks – a pair of cranks attaches to the motor shaft and replaces the original cranks of the bicycle.
  • Display – VD618 colour display with buttons mounts on the handlebars and shows speed, power, battery status, daily and total kilometres, and assistance level.
  • Brake Sensor – when the brake is pressed, it sends a signal to the control unit and interrupts the motor operation, so the drive does not counteract braking.
  • Control – the thumb throttle allows riding with motor assistance without pedalling.
  • Speed Sensor – the sensor with a magnet transmits information about the bike's speed to the system and the display.
  • Lighting – the kit includes a front light that connects to the bike's electrical system.
  • Cabling – the 1T4 cable harness connects the motor to the display, throttle, brake sensor, and light.
  • Tools – the package includes a BBS key, crank puller, and tool for removing the bottom bracket, allowing the original bottom bracket to be removed.
  • Installation – the kit contains mounting screws, cable ties for securing cables, and a user manual.
  • Finish – the motor body and chainring with cover are black.

Package Contents:

  • 1x Bafang 48 V 750 W mid motor
  • 1x VD618 colour display
  • 1x brake sensor kit
  • 1x 44T chainring with cover
  • 2x crank
  • 1x thumb throttle
  • 1x speed sensor
  • 1x 1T4 cable harness
  • 1x front light
  • 1x set of mounting screws
  • 1x BBS key
  • 1x crank puller
  • 1x tool for removing the bottom bracket
  • 1x set of cable ties
  • 1x sticker
  • 1x user manual

This kit is designed for converting a bicycle into an electric bike with a mid motor rated at 750 W and 48 V. The motor is installed in frames with a 100 mm bottom bracket and the chain drive retains the original gears of the bike. The 44T chainring, cranks, and necessary tools are included in the package. VD618 colour display shows riding data and the brake sensor disables the motor when braking. The thumb throttle, speed sensor, and front light complete the kit's equipment.

Delivery and Returns
Price incl. VAT €767.21