Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Wood Countersink with 3 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws
Wood Countersink with 3 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

Wood Countersink with 3 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The 3 mm drill bit with an attached 8 mm countersink prepares both the hole and the recess for the screw head in one go. Suitable for wood, MDF and plywood in the workshop. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wood Countersink with 3 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The countersink with a 3 mm diameter pilot drill creates a pilot hole and a conical recess for the screw head in a single step. The cutting head has a diameter of 8 mm, making it suitable for standard wood screws with smaller countersunk heads. There is no need to switch between a drill bit and a separate countersink, so the job is quicker and the hole is accurately centred. The screw head then sits flush with the surface, with nothing protruding. This tool is ideal for DIY enthusiasts, cabinetmakers and anyone assembling furniture.

The pilot drill is made from high-speed steel (HSS) and has a spiral flute that removes swarf from the hole. The cutting head is made from tungsten steel and has ground cutting edges for clean, burr-free cutting in wood. The drill bit is held in the metal collar by a locking screw. The 6.35 mm hex shank fits both drill chucks and quick-release bit holders in cordless screwdrivers.

  • Type – wood countersink with pilot drill
  • Pilot drill diameter – 3 mm
  • Countersink diameter – 8 mm
  • Drill bit material – high-speed steel (HSS) with spiral flute
  • Cutting head material – tungsten steel
  • Shank – 6.35 mm hex (1/4 inch)
  • Suitable materials – solid wood, MDF, plywood and chipboard
  • Compatible tools – electric drill, cordless drill, bench drill and pillar drill
  • Use – countersunk screws flush with the surface and screws recessed below the surface
  • Package contents – 1 countersink with 3 mm pilot drill and 8 mm countersink

Drill at a medium speed and hold the tool perpendicular to the material surface. To hide the screw head below the surface and then cover the hole with a plug or filler, simply drill a little deeper. When working with hardwood, it is a good idea to withdraw the drill bit occasionally to clear away the swarf. Clean the tool after use and store it in a dry place. Before drilling into a visible surface, test the countersinking depth on a scrap piece of the same material. This will help you determine how deep to drill so that the screw head sits exactly as you want it to. Drill carefully into thin boards to avoid making the recess too deep and ensure the screw holds securely.

The 3 mm drill countersink is suitable for assembling furniture, shelves, trims and small wooden structures. Combining the drill bit and countersink in one tool saves time with every screw and ensures that all holes are recessed to the same depth. The hex shank allows quick, tool-free changes and the tool is held firmly in a quick-release holder. The 3 mm pilot drill diameter is suitable for drilling pilot holes for thinner screws, which could easily split the wood if driven without pre-drilling. The tungsten steel cutting head retains its sharp edge for a long time. The tool is designed for working with wood and sheet materials in both home and professional workshops.

Price incl. VAT €12.18