Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Wood Countersink with 2 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws
Wood Countersink with 2 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

Wood Countersink with 2 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The 2 mm pilot drill with an 8 mm countersink drills a pilot hole and creates a countersink for the head of a smaller screw at the same time. For wood, MDF and plywood in the workshop. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wood Countersink with 2 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The countersink with a 2 mm diameter pilot drill creates both a pilot hole and a conical countersink for the screw head in one step. The cutting head has a diameter of 8 mm, making it suitable for standard wood screws with a smaller countersunk head. There is no need to switch between a drill bit and a separate countersink, so work is quicker and the hole is precisely centred. The screw head then sits flush with the surface, with nothing protruding. This tool is ideal for DIY enthusiasts, carpenters and anyone assembling furniture.

The pilot drill is made from high-speed steel (HSS) and has a spiral flute that clears wood shavings from the hole. The cutting head is made from tungsten steel with ground cutting edges, cutting wood cleanly and without splintering. A locking screw holds the drill bit in the metal collar. The 6.35 mm hex shank fits in a drill chuck as well as a quick-release bit holder in a cordless screwdriver.

  • Type – countersink with pilot drill for wood
  • Pilot drill diameter – 2 mm
  • Countersink diameter – 8 mm
  • Drill bit material – high-speed steel (HSS) with spiral flute
  • Cutting head material – tungsten steel
  • Shank – 6.35 mm hex (1/4 inch)
  • Suitable materials – solid wood, MDF, plywood and chipboard
  • Compatible tools – electric drill, cordless drill, bench drill and row drill
  • Use – countersunk screws flush with the surface or recessed below the surface
  • Package contents – 1 countersink with 2 mm pilot drill and 8 mm countersink

Drill at a medium speed and hold the tool perpendicular to the material surface. To conceal the screw head below the surface and then cover the hole with a plug or filler, simply drill a little deeper. When working with hardwood, it is a good idea to withdraw the drill bit from time to time to clear the shavings. Clean the tool after use and store it in a dry place. Before drilling into a visible surface, test the countersink depth on an offcut of the same material. This will help you determine how deep to drill so the screw head sits exactly as you want it to. Drill carefully in thin boards to avoid making the countersink too deep and compromising the screw's hold.

The 2 mm countersink with drill bit is suitable for assembling furniture, shelves, trim and small wooden structures. Combining the drill bit and countersink in one tool saves time on every screw and ensures that all holes are countersunk to the same depth. The hex shank allows quick bit changes without a key, and the tool is held securely in a quick-release holder. The slim 2 mm pilot drill is suitable for drilling pilot holes for thin screws and small pieces of trim, where the wood could easily split if not pre-drilled. The cutting head made from tungsten steel retains its sharp edge for a long time. The tool is designed for working with wood and sheet materials in both home and professional workshops.

Price incl. VAT €12.18