Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Wood Countersink with 2.8 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws
Wood Countersink with 2.8 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

Wood Countersink with 2.8 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The 8 mm countersink with a 2.8 mm drill bit drills both the hole and the countersink for a countersunk screw head in one pass. Suitable for wood, MDF and chipboard during assembly. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wood Countersink with 2.8 mm Pilot Drill 8 mm Countersink Diameter 6.35 mm Hex Shank HSS and Tungsten Steel For Countersunk Screws

The countersink with a 2.8 mm pilot drill creates both a pilot hole and a conical countersink for the screw head in one step. The cutting head has a diameter of 8 mm, making it suitable for standard wood screws with smaller countersunk heads. There is no need to switch between a drill bit and a separate countersink, so work is quicker and the hole is precisely centred. The screw head then sits flush with the surface, with nothing protruding. This tool is ideal for DIY enthusiasts, carpenters and anyone assembling furniture.

The pilot drill is made from high-speed steel (HSS) and has a spiral flute that removes chips from the hole. The cutting head is made from tungsten steel with ground cutting edges, enabling it to cut wood cleanly without burrs. A locking screw secures the drill in the metal sleeve. The 6.35 mm hex shank fits the chuck of a drill and the quick-release bit holder of a cordless screwdriver.

  • Type – countersink with pilot drill for wood
  • Pilot drill diameter – 2.8 mm
  • Countersink diameter – 8 mm
  • Drill material – high-speed steel (HSS) with spiral flute
  • Cutting head material – tungsten steel
  • Shank – 6.35 mm hex (1/4 inch)
  • Suitable materials – solid wood, MDF, plywood and chipboard
  • Compatible tools – electric drill, cordless drill, bench drill and drill press
  • Use – countersunk screws flush with the surface and screws recessed below the surface
  • Package contents – 1 countersink with 2.8 mm pilot drill and 8 mm countersink

Drill at medium speed and hold the tool perpendicular to the material surface. To conceal the screw head below the surface and cover the hole with a plug or filler, simply drill a little deeper. When working with hardwood, it is a good idea to withdraw the drill occasionally to clear away the chips. Clean the tool after use and store it in a dry place. Before drilling into a visible surface, test the countersink depth on a scrap piece of the same material. This will help you determine how deep to drill so the screw head sits exactly as you want it. Drill carefully into thin boards to ensure the countersink is not too deep and the screw remains firmly secured.

The countersink with a 2.8 mm drill bit is suitable for assembling furniture, shelves, trim and small wooden structures. Combining the drill and countersink in one tool saves time with every screw and ensures a consistent countersink in every hole. The hex shank allows quick, keyless changes and holds the tool securely in a quick-release holder. The 2.8 mm pilot drill is suitable for pre-drilling holes for standard wood screws, which could easily split the material if driven without a pilot hole. The cutting head made from tungsten steel retains its sharpness for a long time. The tool is designed for working with wood and board materials in both home and professional workshops.

Price incl. VAT €12.62