Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Wood Countersink Drill Bit with 10 mm Countersink and 2.5 mm Pilot Drill Hex Shank 6.35 mm HSS High-Speed Steel For Screws with Larger Heads
Wood Countersink Drill Bit with 10 mm Countersink and 2.5 mm Pilot Drill Hex Shank 6.35 mm HSS High-Speed Steel For Screws with Larger Heads

Wood Countersink Drill Bit with 10 mm Countersink and 2.5 mm Pilot Drill Hex Shank 6.35 mm HSS High-Speed Steel For Screws with Larger Heads

The 10 mm countersink with a 2.5 mm pilot drill bores a hole for the screw and a wide recess for its head in one go. For furniture, mouldings and wood cladding. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wood Countersink Drill Bit with 10 mm Countersink and 2.5 mm Pilot Drill Hex Shank 6.35 mm HSS High-Speed Steel For Screws with Larger Heads

The countersink drill bit combines a 2.5 mm diameter pilot drill with a 10 mm diameter cutting head. In a single pass, it creates a hole for the screw and a conical recess that can accommodate even a larger screw head. There is no need to switch between a drill bit and a separate countersink, saving time on every joint and ensuring the hole is always precisely centred. The screw head sits flush with the surface or can be recessed further. The tool is suitable for joinery, furniture assembly and DIY projects.

The pilot drill is made from HSS high-speed steel, and its spiral flute carries shavings out of the hole. The tungsten steel cutting head has ground cutting edges that cut wood smoothly without tearing the fibres. The drill bit is secured in the sleeve with a locking screw. The 6.35 mm hex shank fits a drill chuck and a quick-release bit holder.

  • Type – countersink drill bit for wood
  • Pilot drill diameter – 2.5 mm
  • Countersink diameter – 10 mm
  • Drill bit material – HSS high-speed steel
  • Cutting head material – tungsten steel with ground cutting edges
  • Shank – 6.35 mm hex (1/4 inch)
  • Suitable materials – wood, MDF, plywood and chipboard
  • Compatible tools – handheld electric drill, cordless drill, bench drill and pillar drill
  • Use – countersinking for countersunk screws and screws concealed below the surface
  • Package contents – 1 countersink drill bit with 10 mm countersink and 2.5 mm pilot drill

For a clean result, hold the drill perpendicular to the surface and work at a medium speed. If you plan to cover the hole with a wooden plug or filler, drill a little deeper so the screw head sits below the surface. In hardwood, withdraw the drill bit periodically and regularly clear shavings from the flute. After use, wipe the tool clean and store it in a dry place. First test the countersinking depth on a scrap piece of the same material to determine how deep to drill on visible surfaces. Work carefully with thin boards to leave enough material after countersinking so the screw holds firmly.

The 10 mm countersink drill bit is ideal for making and assembling furniture, cladding and wooden structures, as well as for household repairs. The wide recess accommodates larger screw heads and ensures all the holes have a uniform appearance. The 2.5 mm pilot drill pre-drills a hole for thinner screws with larger heads, helping prevent the wood from splitting as the screw is driven in, even close to the edge of a board. The 6.35 mm hex shank speeds up changes on a cordless drill, and the tool is held securely in a quick-release holder. The tungsten steel cutting head ensures a precise cut. This one tool replaces both a drill bit and a separate countersink in any home or professional workshop.

Price incl. VAT €12.62