Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Wire Branch Quick Connectors 30 pcs Lever Connector 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Electrical
Wire Branch Quick Connectors 30 pcs Lever Connector 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Electrical

Wire Branch Quick Connectors 30 pcs Lever Connector 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Electrical

Thirty lever-operated branch connectors for distributing a wire in three directions without screws. Each wire is secured by its own lever, and the connection can be released again. Full description
In stock
€21.79
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wire Branch Quick Connectors 30 pcs Lever Connector 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Electrical Installation

This value pack contains thirty lever-operated branch connectors that split one wire into three outputs. The incoming wire is inserted from one side and the three outgoing wires from the opposite side, with each secured by its own lever. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screws or insulating tape.

Inside the connector are contacts made of red copper, offering good conductivity and corrosion resistance. The wires are pressed into place by a flexible stainless steel clip that holds the connection securely, even after the levers have been opened repeatedly. The housing is made of flame-retardant plastic with increased resistance to high temperatures. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including solid single-core wires and flexible stranded wires.

The branching design saves space in the installation box, replacing several separate connectors and a bulky terminal block. Each wire has its own opening and lever, so you can disconnect one output without affecting the others. The connector is suitable for connecting three lights to one switch, distributing a neutral or earth wire in several directions, or adding more appliances to an existing circuit. There is a small eyelet with a hole on the side of the housing.

  • Type – lever-operated branch connector with one input and three outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 29.5 x 17.8 x 13.3 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with increased heat resistance
  • Operation – separate lever for each of the four wires
  • Package contents – 30 lever-operated branch connectors

Even less experienced DIYers can install these connectors. First, strip the insulation from the end of the wire, then lift the lever and insert the stripped end into the opening as far as it will go. Finally, fold the lever back down to secure the wire. Connect all three output wires in the same way. If you need to disconnect the connection, simply lift the lever again and pull out the wire. Always disconnect the power supply before working on electrical installations, and make sure no bare wire protrudes from the connector housing.

The pack of thirty is enough for rewiring an entire flat or for keeping as workshop stock. The connectors, with contacts made of red copper, provide reliable wire branching without tools and can be reused. The compact housing, measuring 29.5 x 17.8 x 13.3 mm, fits into smaller installation boxes, keeping connections neat. The simple lever operation saves time with every connection. This is a practical solution for electricians, maintenance workers and experienced DIYers.

Price incl. VAT €21.79