Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Vibration and Touch Alarm Kit with Glass Vibration Switch Buzzer and LED Diode Soldering Kit for Beginners
Vibration and Touch Alarm Kit with Glass Vibration Switch Buzzer and LED Diode Soldering Kit for Beginners

Vibration and Touch Alarm Kit with Glass Vibration Switch Buzzer and LED Diode Soldering Kit for Beginners

A simple alarm that responds to vibration or touch with a buzzer sound and LED light. A board and component kit for initial experiments with soldering and electronics. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Vibration and Touch Alarm Kit with Glass Vibration Switch Buzzer and LED Diode Soldering Kit for Beginners

The vibration and touch alarm kit is a small soldering kit from which you can assemble a simple alarm device. The circuit responds to vibrations detected by the glass vibration switch and also to the touch of a metal strip on the edge of the board. When activated, a buzzer sounds and the LED diode lights up. The kit is supplied as loose components for soldering, allowing you to assemble the entire circuit yourself. It is suitable for beginners, students, electronics clubs, and hobbyists who want to try out how simple signalling works.

A compact printed circuit board features an eight-pin integrated circuit that forms the core of the alarm, along with a transistor, resistors, ceramic and electrolytic capacitors, and a blue trimmer. The vibration switch takes the form of a small glass tube with leads, which you will solder into the position marked S1. The buzzer is located directly on the board, as is the signalling diode. Power is connected to the solder pads marked as DC with indicated polarity. The positions of all components are marked on the board, making it easy to orient yourself during assembly even without extensive experience.

  • Type – alarm kit for soldering
  • Triggering – by vibration or touch
  • Vibration Sensor – glass vibration switch
  • Touch Element – metal strip on the edge of the board
  • Signalling – buzzer and LED diode
  • Adjustment – trimmer on the board
  • Power Connection – solder pads with indicated polarity
  • Design – loose components for soldering and assembly
  • Contents of the Package – printed circuit board and component kit (integrated circuit, glass vibration switch, buzzer, LED diode, transistor, trimmer, resistors, capacitors, metal touch strip)

When assembling, start with the resistors and smaller components, then place the integrated circuit, transistor, capacitors, and trimmer. Finally, solder the buzzer, LED diode, and vibration switch. Pay attention to the correct orientation of the integrated circuit according to the cutout on the package, as well as the polarity of the electrolytic capacitors, diode, and buzzer. The glass switch is fragile, so do not bend it too close to the glass while soldering. After completion, check the connections, remove solder bridges, and connect the power with the correct polarity.

The vibration and touch alarm kit is an ideal first project for anyone who wants to learn to solder while also seeing and hearing the results of their work. On the small board, you will practically test how the sensor triggers the signalling circuit and how to control the buzzer and diode. The finished alarm is suitable as a demonstration for school or electronics club and as a basis for your own experiments with drawer or box protection. The touch triggering is ensured by the metal touch strip, which can be activated simply by touching it with a finger. The kit contains only a few components, so you can assemble it in a short time. It is a practical and inexpensive way to get started with electronics.

Price incl. VAT €4.76