LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Photo, Audio-Video & TV Hi-Fi Amplifiers Valve Stereo Amplifier 160 W + 160 W, Bluetooth 5.0 aptX, MM Phono Input, Aluminium Body, Black, for Turntable and Home Audio System
Valve Stereo Amplifier 160 W + 160 W, Bluetooth 5.0 aptX, MM Phono Input, Aluminium Body, Black, for Turntable and Home Audio System

Valve Stereo Amplifier 160 W + 160 W, Bluetooth 5.0 aptX, MM Phono Input, Aluminium Body, Black, for Turntable and Home Audio System

Compact valve receiver with aptX-LL, phono preamplifier for turntables, subwoofer output, bass and treble control. Dimensions 115 × 166 × 60 mm. Full description
In stock
€250.61
Safe shopping Safe shopping
Overview
Valve Stereo Amplifier 160 W + 160 W, Bluetooth 5.0 aptX, MM Phono Input, Aluminium Body, Black, for Turntable and Home Audio System

The valve amplifier in a black aluminium finish combines the sound of vacuum tubes with the power of a digital amplification circuit. The stereo receiver offers wireless connectivity via Bluetooth 5.0 with support for aptX and aptX-LL codecs, classic stereo RCA inputs, and a built-in MM phono preamplifier, allowing you to connect a turntable without additional equipment. The maximum output power of 160 W + 160 W at a load of 4 Ω enables it to drive most home passive speakers, from bookshelf to desktop and ceiling speakers. A separate output for an active subwoofer expands the setup to a 2.1 audio system, and the valve stage switch allows you to compare the valve and purely digital sound. Compact dimensions of 115 × 166 × 60 mm and a weight of 782 g make it suitable for a desk, living room, or smaller listening space.

  • Power and Circuit: maximum output power 160 W + 160 W at a load of 4 Ω, amplifier circuit TDA7498E, speaker impedance 4–8 Ω
  • Wireless Transmission: Bluetooth 5.0 with support for aptX and aptX-LL, QCC3008 chip, screw-on external antenna
  • Inputs: MM Phono input for turntables with ground terminal GND, stereo RCA (AUDIO IN) and Bluetooth, input switching via BT / PHONO / RCA selector
  • Outputs: speaker banana terminals for 2.0 stereo and SUB OUT output for connecting an active subwoofer to create a 2.1 system
  • Valves: pair of JAN5654 valves in a socket, compatible with types 6K4 / 6J1 / 6J4 / 6AK5
  • Controls: volume, bass, and treble knobs with a range of ±6 dB, TONE switch, and PASS / BYPASS switch for the valve stage
  • Sound Parameters: frequency range 20 Hz–20 kHz (±3 dB), SNR over 90 dB, THD 0.5 %, input sensitivity 0.775 V, operational amplifier NE5532
  • Construction: aluminium chassis with heat dissipation, double-sided printed circuit board with integrated MM phono circuit, gold-plated connectors
  • Lighting: valve backlighting in blue or orange with the option to turn off via LED switch
  • Power Supply: DC 19–35 V, power connector on the rear panel
  • Dimensions and Weight: 115 × 166 × 60 mm, net weight 782 g

Package Contents

  • 1× valve amplifier
  • 2× JAN5654 valves
  • 1× power supply 32 V / 5 A and power cable
  • 1× Bluetooth antenna
  • 1× user manual

The valve amplifier with Bluetooth and MM Phono input is suitable for listening to vinyl records, music from a phone, and for audio output from a television or computer. The combination of the valve stage and the TDA7498E power circuit provides sufficient power for passive speakers with an impedance of 4–8 Ω. The bass and treble controls and the bypass switch allow you to adjust the sound according to the listening environment and the speakers used. With the output for an active subwoofer, the setup can be expanded to a 2.1 system at any time. Its small dimensions and aluminium chassis with good heat dissipation facilitate the placement of the amplifier in both desktop and home audio setups.

Price incl. VAT €250.61