LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Garage Equipment Garage Accessories Universal Abrasive Non-Woven Roll 12.7 x 100 cm Thickness 8 mm Nylon Non-Woven Chestnut Red For Sanding Paint and Surface Preparation
Universal Abrasive Non-Woven Roll 12.7 x 100 cm Thickness 8 mm Nylon Non-Woven Chestnut Red For Sanding Paint and Surface Preparation

Universal Abrasive Non-Woven Roll 12.7 x 100 cm Thickness 8 mm Nylon Non-Woven Chestnut Red For Sanding Paint and Surface Preparation

You can cut the non-woven fabric into any shape, allowing you to reach recesses and corners. It dulls the substrate before applying primer and paint without leaving deep scratches. Full description
In stock
€46.24
Safe shopping Safe shopping
Overview
Universal Abrasive Non-Woven Roll 12.7 x 100 cm Thickness 8 mm Nylon Non-Woven Chestnut Red For Sanding Paint and Surface Preparation

The abrasive non-woven fabric roll is used to prepare surfaces before applying primer or topcoat, effectively dulling and unifying the substrate without the deep scratches left by sandpaper. The roll measures 12.7 x 100 cm and can be cut with scissors into any shape, allowing you to create a strip for hand sanding or a small piece for recesses or corners. Nylon non-woven fabric is flexible and conforms to the shape of the part, enabling access to rounded surfaces where a hard sanding block cannot reach. The chestnut red finish corresponds to the commonly used medium-fine type found in paint shops and garages. The non-woven fabric works across its entire thickness, so its abrasive effect does not diminish with wear as it does with sandpaper that has grit applied to it.

  • Custom Cutting — cut exactly as much as you need from the roll, leaving the rest in its original packaging for future use.
  • Material Thickness — the non-woven fabric is 8 mm thick, making it comfortable to hold and cushioning finger pressure against the surface.
  • Flexible Structure — the fibres adapt to edges, grooves, and rounded surfaces that a hard sanding block cannot reach.
  • Preparation Before Painting — the non-woven fabric unifies the gloss of the substrate and creates micro-scratches that help the paint adhere better.
  • Removal of Contaminants — it can also be used to remove remnants of old paint, light corrosion, or dried dirt from metal.
  • Finish — the chestnut red colour corresponds to a medium-fine non-woven fabric suitable for most common tasks.
  • Wide Application — suitable for metal, wood, plastic, and kitchen stainless steel surfaces, where it aligns the sanding in one direction.
  • Contents of the Package — 1x roll of abrasive non-woven fabric 12.7 x 100 cm

Decorators, auto body repairers, carpenters, and DIY enthusiasts will find this non-woven fabric useful when renovating parts, furniture, or railings. Compared to steel wool, it has the advantage that nylon fibres do not rust and do not leave metal particles on the surface that could later cause rust spots under the paint. The non-woven fabric can be used dry or with water or abrasive paste depending on the nature of the work. After use, simply rinse the piece and let it dry, allowing it to last for more than one sanding session. A roll of 1 m in length is sufficient for several smaller parts or one larger surface.

Price incl. VAT €46.24