Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Two-Colour Blinker Kit for Soldering with 24 Red and Blue LEDs NE555 and CD4017 Circuits Soldering Set for Education and Hobby
Two-Colour Blinker Kit for Soldering with 24 Red and Blue LEDs NE555 and CD4017 Circuits Soldering Set for Education and Hobby

Two-Colour Blinker Kit for Soldering with 24 Red and Blue LEDs NE555 and CD4017 Circuits Soldering Set for Education and Hobby

Soldering kit with a warning effect alternating red and blue LEDs. The NE555 timer and CD4017 counter control the effect reminiscent of warning beacons. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Two-Colour Blinker Kit for Soldering with 24 Red and Blue LEDs NE555 and CD4017 Circuits Soldering Set for Education and Hobby

The two-colour blinker kit is a soldering set from which you can assemble an effect of alternating flashing red and blue lights. The board contains a total of 24 LEDs, half red and half blue, divided into two groups at opposite ends of the board. The effect is controlled by the NE555 timer along with the CD4017 decade counter, which sequentially switches the individual groups of LEDs. The resulting flashing resembles warning lights, and the finished board is striking at first glance. The kit is supplied as loose components for soldering and is suitable for hobbyists, students, and anyone interested in electronics.

The printed circuit board is long and narrow, with red LEDs at one end and blue at the other, with the control section of the circuit in between. In addition to both integrated circuits, it includes two 8050 transistors, rectifier diodes, resistors, an electrolytic capacitor, a ceramic capacitor, and a trimmer. The positions of all components are marked on the board, making it easy to determine where each component belongs during assembly. For connecting the power supply, there are two soldering points marked GND and VCC. Thanks to the large number of LEDs, you will practice repetitive soldering of the same components well with this kit.

  • Type – two-colour blinker kit for soldering
  • Light Effect – 12 red and 12 blue LEDs
  • Integrated Circuits – NE555 timer and CD4017 decade counter
  • Switching Elements – two 8050 transistors
  • Other Components – diodes, trimmer, capacitors, and resistors
  • Power Connection – soldering points GND and VCC
  • Execution – loose components for soldering and assembly
  • Purpose – electronics education and soldering training
  • Contents of the Package – printed circuit board and blinker component set (NE555 and CD4017 circuits, 12 red and 12 blue LEDs, 2 transistors, diodes, trimmer, capacitors, resistors)

When assembling, start with the resistors and diodes, then fit the capacitors, trimmer, transistors, and integrated circuits, and finally all the LEDs. Pay attention to the orientation of the integrated circuits according to the notch on the casing and the polarity of the diodes, LEDs, and electrolytic capacitor. Fit the red and blue diodes into the positions according to the colours in the photograph, so that each group lights up at its end of the board. After soldering, check the connections and remove any excess flux.

The two-colour blinker kit is an impressive project where you will practice soldering a larger number of components and understand how the timer and counter work together. The alternating red and blue lights provide immediate visual feedback, so you will see right away that your circuit has worked. The finished board can serve as a decoration, a model accessory, or a demonstration for an electronics club. The kit is suitable for beginners eager to work as well as for more advanced hobbyists. It is a fun way to combine soldering practice with the basics of digital electronics.

Price incl. VAT €4.76