Home page Home page Hobbies & Garden Tools Hand Tools Glass and bottle cutters TC-90 Replacement Head for Manual Glass Cutter 2.5 x 1.3 cm Metal Alloy Body with Cutting Wheel For Straight Cuts on Glass Thickness 2 to 8 mm
TC-90 Replacement Head for Manual Glass Cutter 2.5 x 1.3 cm Metal Alloy Body with Cutting Wheel For Straight Cuts on Glass Thickness 2 to 8 mm

TC-90 Replacement Head for Manual Glass Cutter 2.5 x 1.3 cm Metal Alloy Body with Cutting Wheel For Straight Cuts on Glass Thickness 2 to 8 mm

TC-90 cutting head as a spare part for manual glass cutter. Metal body 2.5 x 1.3 cm with wheel for straight cuts on glass thickness of 2 to 8 mm. Full description
In stock
€6.51
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TC-90 Replacement Head for Manual Glass Cutter 2.5 x 1.3 cm Metal Alloy Body with Cutting Wheel For Straight Cuts on Glass Thickness 2 to 8 mm

The replacement head marked TC-90 serves as a spare part for the manual glass cutter and is helpful when the original cutting head is worn out. It is not necessary to purchase a whole new cutter; simply replace the head and the tool can continue to be used. The head is designed for straight cuts on glass with a thickness of 2 to 8 mm, which covers the common sheet glass used in households, workshops, and DIY projects. The cutting wheel is housed in a slot on the bottom edge of the head and creates a score line along which the glass is subsequently broken. The small and lightweight head can easily be stored in a toolbox.

The body of the head is made of metal alloy, which the seller describes as a solid and hard material suitable for long-term use. The angled front of the head facilitates tracking the spot where the wheel creates the score, thus ensuring precise direction along the ruler. On the side of the head, there is a small screw and a hole running through the body, both of which are clearly visible in the photographs. The compact dimensions ensure that the cutter head does not unnecessarily burden the tool, keeping it comfortable to work with.

  • Product Type – replacement cutting head for manual glass cutter
  • Designation – TC-90
  • Material – metal alloy
  • Dimensions – 2.5 x 1.3 cm
  • Purpose – straight cuts on glass
  • Glass Thickness – 2 to 8 mm
  • Cutting Element – wheel in the slot on the bottom edge
  • Package Contents – 1 TC-90 replacement cutting head

Before cutting, it is advisable to clean the glass and place it on a flat, sturdy surface, such as a table with a thin felt or cloth. The cutter should be guided in one continuous motion along the entire length of the cut with constant pressure, and it is not recommended to pass over the same score line repeatedly. The glass can then be carefully broken along the created score. After finishing work, clean the head of glass dust and store it in a dry place, ready for the next use. Always wear protective gloves and goggles when working with glass.

The TC-90 replacement head is a simple way to extend the life of a manual glass cutter without the need to purchase a new tool. It is useful for straight cuts on sheet glass up to a thickness of 8 mm, such as when glazing frames, repairing glass panels, or during home creative projects. With dimensions of 2.5 x 1.3 cm, it takes up little space in the workshop and can be kept on hand as a spare part for when the original head stops cutting. The metal body with the cutting wheel is ready for regular work with glass. The package contains one separate head.

Price incl. VAT €6.51