Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates T Wire Tap Quick Connectors for Wires 5 pcs T1 No Stripping For 18 to 22 AWG Cables 25.2 x 6.5 mm Transparent for Cars and Lighting
T Wire Tap Quick Connectors for Wires 5 pcs T1 No Stripping For 18 to 22 AWG Cables 25.2 x 6.5 mm Transparent for Cars and Lighting

T Wire Tap Quick Connectors for Wires 5 pcs T1 No Stripping For 18 to 22 AWG Cables 25.2 x 6.5 mm Transparent for Cars and Lighting

Five T1 wire tap connectors for quickly connecting 18–22 AWG wires without stripping. Simply insert the wires, snap the cover shut and the branch connection is ready. Full description
In stock
€9.13
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
T Wire Tap Quick Connectors for Wires 5 pcs T1 No Stripping For 18 to 22 AWG Cables 25.2 x 6.5 mm Transparent for Cars and Lighting

T-shaped wire tap quick connectors are used to connect a new wire to an existing cable without interrupting the original wiring. The T1 model is designed for 18 to 22 AWG wires and works with both solid and stranded wire. There is no need to strip or solder the wires; the metal contact inside the connector cuts through the insulation when the cover is snapped shut. The connector has compact dimensions of 25.2 x 6.5 mm, so it fits even in confined spaces behind a dashboard or inside a light fitting. The pack of five is suitable for a small repair or a one-off lighting addition when you only need to make a few branch connections.

Installation takes just a few seconds. First, open the cover, place the through cable in the top groove and insert the branch wire into the side opening as far as it will go. Then press the cover shut with pliers until it clicks firmly into place. This presses the contact into both wires and completes the connection. The transparent connector body allows you to check visually that both wires are inserted correctly. Plastic rings in the openings hold the cable in place; if the wire is slightly thicker, simply break out the ring or cut it off with scissors so the cable can pass through without difficulty. The connector is rated for 220 V. Five connectors make a practical supply for a car tool kit or a drawer of electrical materials, keeping them to hand when you need to quickly add a connection for an appliance.

  • Type – T-shaped wire tap quick connector, 1 wire to 1 branch
  • Model – T1
  • Wire size – 18 to 22 AWG
  • Wire type – solid and stranded wire
  • Dimensions – 25.2 x 6.5 mm
  • Voltage – 220 V
  • Installation – no stripping or soldering required; snap the cover shut with pliers
  • Design – transparent body with a black part
  • Package contents – 5 T1 wire tap connectors

The connectors are suitable for installing domestic lighting, connecting auxiliary lights, car radios and speakers in a car, LED strips and low-voltage wiring. Always disconnect the power supply before installation and check that the cable size is within the connector's range. Not all 18 AWG wires have the same outer insulation diameter, so with thicker cables you may need to break out the plastic ring.

T1 wire tap connectors offer a simple way to connect an additional appliance to existing wiring without cutting the cable. Installation without stripping saves time and avoids the need for wire strippers and a soldering iron. The transparent body makes it easy to check the connection, while the compact size allows use even in confined spaces. The set of five is suitable for small modifications where you want to make a branch connection quickly and without a soldering iron. The pack contains 5 pcs of connectors ready for immediate use.

Price incl. VAT €9.13