Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates T-shaped Quick Splice Connectors for Wires 20 pcs T1 Insulation Displacement Connectors For 18 to 22 AWG Cables 25.2 x 6.5 mm For Car LED and Audio
T-shaped Quick Splice Connectors for Wires 20 pcs T1 Insulation Displacement Connectors For 18 to 22 AWG Cables 25.2 x 6.5 mm For Car LED and Audio

T-shaped Quick Splice Connectors for Wires 20 pcs T1 Insulation Displacement Connectors For 18 to 22 AWG Cables 25.2 x 6.5 mm For Car LED and Audio

Value pack of 20 T1 tap connectors for 18–22 AWG wires. Create a branch connection without stripping or soldering, simply by firmly snapping the cover shut with pliers. Full description
In stock
€14.37
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
T-shaped Quick Splice Connectors for Wires 20 pcs T1 Insulation Displacement Connectors For 18 to 22 AWG Cables 25.2 x 6.5 mm For Car LED and Audio

T-shaped quick splice connectors are used to connect a new wire to an existing cable without interrupting the original wiring. The T1 model is designed for wires with a cross-section of 18 to 22 AWG and works with both solid and stranded wires. The wires do not need to be stripped or soldered; the metal contact inside the connector cuts through the insulation when the cover is snapped shut. The connector has compact dimensions of 25.2 x 6.5 mm, so it also fits into tight spaces behind a dashboard or inside a light fitting. The larger pack of twenty is ideal for electricians, car repair shops and DIY enthusiasts who frequently make branch connections or are preparing a more extensive installation.

Installation takes just a few seconds. First, open the cover, place the through-wire in the upper groove and push the branch wire into the side opening as far as it will go. Then press the cover shut with pliers until it snaps firmly into place. This presses the contact into both wires and completes the connection. The connector’s transparent body allows you to check visually that both wires are inserted correctly. Plastic rings in the openings hold the cable in place; if a wire is slightly thicker, simply break off the ring or cut it off with scissors, and the cable will pass through without difficulty. The connector is rated for 220 V. Twenty connectors are enough to distribute power throughout a vehicle, connect several lights in a workshop or complete repeat jobs, so you will not need to order them again.

  • Type – T-shaped quick splice connector, 1 wire to 1 branch
  • Model – T1
  • Wire cross-section – 18 to 22 AWG
  • Wire type – solid and stranded
  • Dimensions – 25.2 x 6.5 mm
  • Voltage – 220 V
  • Installation – no stripping or soldering required; snap the cover shut with pliers
  • Design – transparent body with a black part
  • Pack contents – 20 T1 tap connectors

These connectors are useful when installing household lighting, connecting auxiliary lights, car radios and speakers in vehicles, LED strips and low-voltage wiring. Always disconnect the power supply before installation and check that the cable cross-section is within the connector’s range. Not all 18 AWG wires have the same outer insulation diameter, so be prepared to break off the plastic ring when using thicker cables.

T1 tap connectors offer a simple way to connect an additional device to existing wiring without cutting the cable. Thanks to installation without stripping, you save time and avoid the need for wire strippers and a soldering iron. The transparent body makes it easy to check the connection, while the compact size allows use even in small spaces. The pack of twenty is suitable for workshops, car repair shops and larger projects involving numerous branch connections. The pack contains 20 pcs of connectors, ready for immediate use.

Price incl. VAT €14.37